Thread: Widescreen for L322

2006 - 2010
fullfatrr.com - View topic - Headunit Upgrade on 2006-2010 - Work in progress

2002-2005
fullfatrr.com - View topic - How to... Fit Android Head Unit to 2002-2005...

The 02-05 one has a boatload of info around both also, its 18 pages long

Well yeah, for the 2005-2009s he basically did what I said LOL

Guy on FF is using the unit listed for BMW E53 (which you would for early L322) - it has single DIN body behind the screen.

There are others listed that don't mention BMW, they have a square frame around the screen and there is no single DIN body, just a heat sink - and they are 3x the price.

For Land Rover For Range Rover V8 L322 2002~2012 Liislee Car Multimedia Player NAVI CarPlay Radio 10.25 Screen GPS Navigation|Car Multimedia Player| - AliExpress

I am assuming these are different

Originally Posted by Cambo@oldjaguar

Well yeah, for the 2005-2009s he basically did what I said LOL

For sure Cambo, your installs look awesome and these setups are your profession. This is just a DIY guy

Personally, just trying to add to the thread of info I've found over time poking around the interwebs. For us in QLD, getting to you is a bit difficult so appreciate the posts about upgrades to the L322 as you do. Hopefully be useful to some poor soul that can't get to someone thats in the know.

Cambo, did the unit for the 2002-2005 you used look like this? Front looks the same as the pic above, the 7" unit I installed in my old RR had the same single din back and connectors.

This is what the guy on FF linked to above has used.

b1.jpgb3.jpgb2.jpg


The ones I am looking at for my 07/08 look a little different - and have a different price range. From the front, the bezel has a flatter profile, the back is completely different and the supplied plug pack looks different.
Can see in the first pic it is labelled "For 05-12 Range Rover".

a1.jpga2.jpga3.jpg

I'd like one but I keep thinking about selling the L322 so i don't want to over-capitalise. I bought a PiBus board and a Raspberry Pi a few years ago to do the upgrade PiBUS - A Raspberry Pi-BMW Interface Board but never got around to it. I did the digital TV mod PTV - Digital TV interface board for BMW but got no further (that was a waste of money, reception is so poor. Probably better to use a mobile phone and stream).

Harlie, I think later in the post that the guy said there were newer versions that didn’t have the big back in them, just the flat back. Might have been the 06+ post.

Originally Posted by irubix

For sure Cambo, your installs look awesome and these setups are your profession. This is just a DIY guy

Personally, just trying to add to the thread of info I've found over time poking around the interwebs. For us in QLD, getting to you is a bit difficult so appreciate the posts about upgrades to the L322 as you do. Hopefully be useful to some poor soul that can't get to someone thats in the know.

No I didn't mean it like that. I just thought it was funny that someone else has already figured it out, and I would have been trying to re-invent the wheel because i'm not on that forum and wouldn't have seen that post without you sharing it.

Originally Posted by harlie

Cambo, did the unit for the 2002-2005 you used look like this? Front looks the same as the pic above, the 7" unit I installed in my old RR had the same single din back and connectors.

This is what the guy on FF linked to above has used.

b1.jpgb3.jpgb2.jpg

Yes that looks exactly like the one I installed in the 2003.

Originally Posted by harlie

The ones I am looking at for my 07/08 look a little different - and have a different price range. From the front, the bezel has a flatter profile, the back is completely different and the supplied plug pack looks different.
Can see in the first pic it is labelled "For 05-12 Range Rover".

a1.jpga2.jpga3.jpg

Thanks for the pics, so it looks like they have a plug & play harness from the factory head unit, but I am still a bit puzzled that they aren't differentiating on the model year ranges, because of the steering wheel controls.

And I don't see any external box in the pics for the SWC adaption, like what you see in the pics BMW unit for i-Bus. There are similar boxes for LINbus too. But they don't show anything here.