Thread: Injector replacement

Hi all. 2003 TD6 L322,
Had two erratic injectors according to the gap tool. Fitted two now bosch injectors. Part number different to original. I guess superseded , anyway runs much nicer however economy has gone up to 16.5
Question ? Do the new injectors need an introduction to the ecu ?

Regards Pas

Originally Posted by theelms66

Hi all. 2003 TD6 L322,
Had two erratic injectors according to the gap tool. Fitted two now bosch injectors. Part number different to original. I guess superseded , anyway runs much nicer however economy has gone up to 16.5
Question ? Do the new injectors need an introduction to the ecu ?

Regards Pas

Pas , I think member Uteman had a L322 3.o ltre likes ours and he told me he had a scanguage he used to fine tine the injectors, each injector has a serial code on it , he entered and set the injectors that way .
it isn't necessary to code injectors in, but the method used fine tuned the injectors. The tool has only licenced to his vin,
I know that feature isn't on the iidtool blue tooth.
I did an erg delete on mine and replaced a couple of injectors an my fuel usage increased by 2 litres per 100kms
regards,
Mario

ps the injector part number is

MJY000070, l cant recall what theBosch part number is