Reply With QuoteStored fault codes would likely show a fault with a front or rear sensor, possibly caused by a broken wire rather than a sensor. Check the rear wiring first as it is more exposed than the front.
Fossicker
SupporterG'day BrainsTrust,
The parking radar is on the blink in my 2011 TDV8.
The in-dash screen works (including the yellow lines), but no 'beep, beep' or red lines as you get closer to an object. There's no 'beep' for the front or back.
I thought it was going to be the parking control module (LR012681), which I have replaced this morning without success. Any other suggestions?
Swaggie
Stored fault codes would likely show a fault with a front or rear sensor, possibly caused by a broken wire rather than a sensor. Check the rear wiring first as it is more exposed than the front.
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
Fossicker
SupporterOriginally Posted by Graeme
Cheers Graeme. Do you think a wiring fault would take the front and rear offline at once?
Gotta get myself a GAP IID...
Swaggie
Have you checked the fuse? #3 10A in the rear panel.
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
Fossicker
SupporterI have now... Fuse is ok.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks