Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16

Thread: Redarc Tow Pro install on a L405 RR TDV6 MY13

  1. 2nd November 2017, 09:54 PM #11
    Graeme
    Graeme is online now Swaggie Vendor
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,030
    Total Downloaded
    0
    I have one of the plugs with pigtails around here somewhere and I have the pin-outs for the socket. When I find them I'll cross-check to colours/pins. The 12V supply uses a 4mm2 wire so will carry all the current the brakes could possibly require.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa
    Reply With Quote Reply With Quote
  2. 2nd November 2017, 10:08 PM #12
    Graeme
    Graeme is online now Swaggie Vendor
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,030
    Total Downloaded
    0
    The adaptor plug:
    black - battery power
    red - trigger/sense (brake switch)
    blue - trailer brakes (from controller)
    white - earth

    I'm unsure if this is what you ended-up with.

    Is the knob fully anti-clockwise?
    Did pressing the knob to use user-controlled mode release the brakes?

    Perhaps you need to reset calibration mode to get it to start again.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa
    Reply With Quote Reply With Quote
  3. 3rd November 2017, 10:19 PM #13
    DiscoDJ
    DiscoDJ is offline Fossicker
    Join Date
    Oct 2017
    Location
    Melbourne
    Posts
    33
    Total Downloaded
    0
    Thanks Graeme

    had the multi meter out and am getting all sorts of fun readings. It appears the blue wire will give power and the black one brakes according to the multimeter. I’ll hook it all up and go for a spin.
    Reply With Quote Reply With Quote
  4. 4th November 2017, 01:58 AM #14
    DiscoDJ
    DiscoDJ is offline Fossicker
    Join Date
    Oct 2017
    Location
    Melbourne
    Posts
    33
    Total Downloaded
    0

    Yay

    Ok. Seem to have it sorted. Put blue wire to power and black wire to brakes. Test drive has trailer brakes at least. So I’m legal. Guess wiring somewhere along the line (factory, prior user?) got mismatched. Happy enough for now. Thanks for your help everyone. Loving this car!
    Reply With Quote Reply With Quote
  5. 29th July 2018, 11:24 AM #15
    NathanAird Guest
    Does anyone know where the fuse is on the D5, that runs the constant 12 volts to the pre-wired loom for the trailer brakes? (The plug above the brake pedal).

    Thank you.
    Reply With Quote Reply With Quote
  6. 29th July 2018, 11:59 AM #16
    Graeme
    Graeme is online now Swaggie Vendor
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,030
    Total Downloaded
    0
    Answered in the other thread that you posted - D5 passenger compartment FL8 is the 30A fusible link.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa
    Reply With Quote Reply With Quote
Page 2 of 2 FirstFirst 12
« Comfort Ride? | Compomotive Rims »

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!