I felt a little self-conscious with my RWC at first but the practicality soon fixed that.
Umm, I’m not sure what to say Re some aspects of this vehicle......
but I will say bravo for being brave enough to add a RWC and rear ladder.
L405, Vogue SE, 4.4SDV8, 8 speed, Rear e-diff
 Swaggie
					
					
						Swaggie
					
					
						I felt a little self-conscious with my RWC at first but the practicality soon fixed that.
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
 Master
					
					
						Supporter
					
					
						Master
					
					
						SupporterLong range fuel tank instead? Reading that sign in the pic, I did the wirulla to kingoonya track with a 22ft van in March this year, it’s a rough old bit of land!
 Master
					
					
						Master
					
					
                                        
					
					
						What is the RWC brand Graeme?
 Swaggie
					
					
						Swaggie
					
					
						I made it. The pivot is out further than needed to clear the lowered tailgate as I allowed for a jerry-can holder between the arm and the tailgate, but then didn't fit one because I modified the arm to lower the wheel and to make it closer to the car. Initially it could be fitted with the van attached but the arm flexed far too much. I also made the mistake of attaching it to the tow-bar tongue instead of it having its own tongue which flexes a little fore and aft although the carrier survived the trip unscathed. If I end-up with an L405 then I'll make one for it but with the lessons learnt from this one.
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
 Master
					
					
						Master
					
					
                                        
					
					
						Thanks Graeme
| Search AULRO.com ONLY! | Search All the Web! | 
|---|
|  |  | 
Bookmarks