Page 3 of 8 FirstFirst 12345 ... LastLast
Results 21 to 30 of 75

Thread: The Peoples D5

  1. #21
    Join Date
    Nov 2016
    Location
    Eltham, Victoria
    Posts
    181
    Total Downloaded
    0
    Scott,

    See attached photos. This was taken at normal height and raised height. I didn't raise or lower the back end which you can also do from the side panel. I think it lowers the car another 40mm something about making it easier for dogs to jump in.


    Cuppabillytea

    The back seats are ok but really designed for young kids. They seem to be a little flat on the floor ie my knees would be up higher than in a normal sitting position. They are comfortable enough. yet to find a seven seater where that row is 'comfortable' for any long trip.


    20170806_111656.jpg20170806_111953.jpg

  2. #22
    Join Date
    Jun 2009
    Location
    Tangambalanga
    Posts
    7,558
    Total Downloaded
    0
    A beautiful car Lee, and it was great to see it out and about on some tracks.

    I didn't get a chance to go over it, but I'm sure I'll get the chance soon enough. Great to meet you, and hoping we'll get the chance to do it all again soon.

  3. #23
    Homestar's Avatar
    Homestar is offline Super Moderator & CA manager Subscriber
    Join Date
    Aug 2010
    Location
    Sunbury, VIC
    Posts
    20,105
    Total Downloaded
    0
    Yeah, would have loved to have more time and look over it properly - beautiful vehicle mate, enjoy it.
    If you need to contact me please email homestarrunnerau@gmail.com - thanks - Gav.

  4. #24
    Join Date
    Nov 2016
    Location
    Eltham, Victoria
    Posts
    181
    Total Downloaded
    0
    Hi guys,

    I have been thinking about paint protection and where possible avoid a few of the bush pin stripes. I am considering 2 things at the moment unless someone can suggest something else

    1. 3m Clear Car Bra. Basically wrapping car in like a glad wrap is best i could describe it. From what i am told you can't notice it on the car and it protects the car really well. Downside is cost.

    2. I was thinking something a long the lines of something that I think has never been done for this context so maybe a business idea. But you know those cars you see with magnet signage on well why not put magnetic sheets across the car. Something like the ebay link below.

    car magnet sheets | eBay


    I honestly don't know which way I will go yet. Just thought I would put it out their for peoples opinions and if anybody has had experience with the clear car bra. I heard years ago it went a yellowy tinge but apparantly the new ones don't.

  5. #25
    Join Date
    Dec 2014
    Location
    Brisbane
    Posts
    206
    Total Downloaded
    0
    Quote Originally Posted by Lee Jackson View Post
    Hi guys,

    I have been thinking about paint protection and where possible avoid a few of the bush pin stripes. I am considering 2 things at the moment unless someone can suggest something else

    1. 3m Clear Car Bra. Basically wrapping car in like a glad wrap is best i could describe it. From what i am told you can't notice it on the car and it protects the car really well. Downside is cost.

    2. I was thinking something a long the lines of something that I think has never been done for this context so maybe a business idea. But you know those cars you see with magnet signage on well why not put magnetic sheets across the car. Something like the ebay link below.

    car magnet sheets | eBay


    I honestly don't know which way I will go yet. Just thought I would put it out their for peoples opinions and if anybody has had experience with the clear car bra. I heard years ago it went a yellowy tinge but apparantly the new ones don't.
    not available yet but can always ask

    Rhinohide | 4x4 Paintwork Protection | Rhinohide Home

  6. #26
    DiscoMick Guest
    Our Mazda has paint protection like a clear film and it's a good idea. Just have to be careful which car wash is used as some have a high salt content which breaks down the film.
    Another option is a thick protection polish (not a cutting polish) to put a layer over the paint.

  7. #27
    Homestar's Avatar
    Homestar is offline Super Moderator & CA manager Subscriber
    Join Date
    Aug 2010
    Location
    Sunbury, VIC
    Posts
    20,105
    Total Downloaded
    0
    Yeah, modern paint protection films are very good, good some in key wear areas on SWMBO's new car. They gaurentee the stuff for 10 years I think, and can be replaced easily enough if damaged.
    If you need to contact me please email homestarrunnerau@gmail.com - thanks - Gav.

  8. #28
    Join Date
    Nov 2016
    Location
    Eltham, Victoria
    Posts
    181
    Total Downloaded
    0
    I see rhinohide.com.au have taken my idea.. oh well back to working for a living. thank you for sharing. I agree the 3m products now for paint protection are awesome. Maybe a combination of both. Will let you know which way i go.

    Again thanks for info on rhinohide never heard of it before tonight.

  9. #29
    LRD414's Avatar
    LRD414 is offline Super Moderator Subscriber
    Join Date
    Oct 2014
    Location
    Brisbane
    Posts
    3,737
    Total Downloaded
    0
    Have a look at Paint Shield by Shield n Peel as another option. I use it and it stops all pin stripes from vegetation and sticks. Roller it on and it dries a satin clear finish. So only used when away on trips as temporary protection, it looks a bit ordinary for city use.

    Much cheaper than clear wrap, although I have wrapped the D4 wheel arches against stone chip damage. A product by Expel I think it is that's claimed to be better than 3M by the guys who applied it and they also use 3M products extensively.

    Scott
    D4 TDV6 MY14 with Llams, Tuffant Wheels, Traxide DBS, APT sliders & protection plates, Prospeed Winch Mount w/ Carbon 12K, Mitch Hitch & Drifta Drawers
    Link to my D4 Build Thread
    D3 2005 V8 Petrol
    Ex '77 RRC 2 door. Long gone but not forgotten.

  10. #30
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,030
    Total Downloaded
    0
    Quote Originally Posted by LRD414 View Post
    it looks a bit ordinary for city use
    and especially so if it gets wet even after it has dried, but it works!
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa

Page 3 of 8 FirstFirst 12345 ... LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!