Thread: Finally....

Originally Posted by Pedro_The_Swift

also, the car found the caravan first plug-in... and yes, the van has all LEDs,
also on my MY16.5, that tekonsha 3052? lead used for brake controller install doesnt work as the car plug is different?

This Auto lecky was impressed though the car was already fused and wired, an earlier one I talked too said he would have to rewire the car front to back as he couldnt be sure of the wiring installed...

Hi Pedro,

I may have missed something..........have you towed the van with the SDV8 yet?

Not yet,, Monday is the day, bought some Milenco Aero 4's that I had to cut down slightly (12cm off the rods...)
no idea if the van/car will sit level until then, the d2 towball always was an inch or two too high,
Only going to Yandina so just enough time to check on wheel bearings,

anyone else using Milenco's? post pics of the attachment? maybe I'm not pushing hard enough...

new seat covers installed,,

Originally Posted by Pedro_The_Swift

Not yet,, Monday is the day, bought some Milenco Aero 4's that I had to cut down slightly (12cm off the rods...)
no idea if the van/car will sit level until then, the d2 towball always was an inch or two too high,
Only going to Yandina so just enough time to check on wheel bearings,

anyone else using Milenco's? post pics of the attachment? maybe I'm not pushing hard enough...

new seat covers installed,,

Nice, you found the oil level check!

The car will always be level but you may need to adjust the height of the towball to get the van level.

I use milenco aero 4s on the defender

Good units

I use cable ties as well as the clamps but I doubt that sort of attachment would suit your upmarket rattler

Hi Pedro, I have used the Milencos. I put the clamps on the underside of the mirror which is more parallel to the ground than the upper side. I have the Milencos then sitting above their rods. the clamps just fit between the mirror glass and the housings, and will still allow you to move the glass with the in-vehicle controls. If you cut down the ends,(like you have mentioned) you can arrange it so that the mirrors can still fold in when you lock the car without the rods touching the bodywork (just). I am in between vans at the moment, I will see if I can dig out a photo of old van.

This photo was with Milenco aero 3.

Originally Posted by Pedro_The_Swift

Not yet,, Monday is the day

Let us know how it goes.
We get our van next week hopefully.

They let me tow a van like ours about 40 Klm's a couple of months ago. The 4.4Lt SDV8 pulled it along nicely.

Thanks for all the info..

Yep, looking to undersling the mirrors, the car ones are such big boofy things to see over/around to start with,