Got a pic and/or part no.? I might know of a few available but I could be wrong. It might be the part I ordered a few of whilst at KLR last year.
EDIT: No, I think it was the Disco 3/4 thermostat housing LR073372
 Fossicker
					
					
						Supporter
					
					
						Fossicker
					
					
						SupporterHello chaps,
Well, mine is broken, and it seems so is everyone else's.
Roadbend are advising a worldwide shortage of these plastic Thermostat Housings.
If you have one, and are willing to part with it, please message me.
Thanks!
Got a pic and/or part no.? I might know of a few available but I could be wrong. It might be the part I ordered a few of whilst at KLR last year.
EDIT: No, I think it was the Disco 3/4 thermostat housing LR073372
Ron B.
VK2OTC
2003 L322 Range Rover Vogue 4.4 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA
RIP Bucko - Riding on Forever
 Master
					
					
						Supporter
					
					
						Master
					
					
						Supportersame engine. 4.4 V8. maybe
4X4 over east.
Discovery 3 RRover Sport 05-09 4.4 V8 OEM Thermostat Housing for Land Rover LR005631
 Swaggie
					
					
						Swaggie
					
					
						LR110459 for the lower (main) section of the housing, LR036058 for the upper section.
They were out of stock in the UK for quite a while but became available again early April. You may want to try UK suppliers.
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
 Fossicker
					
					
						Supporter
					
					
						Fossicker
					
					
						SupporterThanks for your replies - what a good community you've got here.
Here's my understanding of what the housing looks like:
I'm still awaiting confirmation that I've got the right part in the picture, but Graeme has quoted the part numbers - thanks Graeme.
Cheers,
Tallyhochap
 Fossicker
					
					
						Supporter
					
					
						Fossicker
					
					
						SupporterHello Chaps,
Well mine is broken, and so is everyone else's, apparently.
Roadbend advise there is a worldwide shortage of these plastic Thermostat Housings.
Is anyone else having this problem? If so, be advised you might be waiting a while for a part to be available.
Why they're made out of plastic, which fails after numerous heat cycles, I don't know. There's this material called metal which has been proven to last much longer. Sigh ....
I've also posted this in the 'Wanted Adverts' section.
Anyway, if you know of a source of this part please let me know. (I'll get the part number and add to this post in a few days).
Cheers,
Tallyhochap
 Fossicker
					
					
						Supporter
					
					
						Fossicker
					
					
						SupporterI have been advised by Roadbend that the Thermostat Housing has arrived today from the U.K.
Thanks chaps for your contributions to solving my problem.
Kind regards,
Tallyhochap
 Swaggie
					
					
						Swaggie
					
					
						That's the lower / main section but I'd be replacing the top as well especially if the housing is still fitted and being used as the screws from the top into the lower section often can't be undone.
PS My L322's 4.4 TDV8 uses the same part.
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
"How long since you've visited The Good Oil?"
'93 V8 Rossi
'97 to '07. sold.
'01 V8 D2
'06 to 10. written off.
'03 4.6 V8 HSE D2a with Tornado ECM
'10 to '21
'16.5 RRS SDV8
'21 to Infinity and Beyond!
1988 Isuzu Bus. V10 15L NA Diesel
Home is where you park it..
[IMG][/IMG]
According to the other thread they are now available in the UK..
Please post pics of the "breakage"
"How long since you've visited The Good Oil?"
'93 V8 Rossi
'97 to '07. sold.
'01 V8 D2
'06 to 10. written off.
'03 4.6 V8 HSE D2a with Tornado ECM
'10 to '21
'16.5 RRS SDV8
'21 to Infinity and Beyond!
1988 Isuzu Bus. V10 15L NA Diesel
Home is where you park it..
[IMG][/IMG]
| Search AULRO.com ONLY! | Search All the Web! | 
|---|
|  |  | 
Bookmarks