Thread: Bows for Haulmark Trailer

Welcome to the forum.....

Those bows would be like hen's teeth I reckon.

However, the originals are square section aluminium of a size to fit the mounts, and would be simple to copy and bend.

When I get around to making replacements for a new custom canopy, I will use round section (easier on the tarp) and make the bows, which are presently a bit too short to be useful ,somewhat higher.

I suspect the original height was governed by allowing top clearance from the original storage brackets at the front of the trailer

more info here: http://remlr.com/forum/index.php'topic=3577.0

Thanks. I'm taking it to an metal fabricator tomorrow as the draw bar needs fixing. Looks like it's been jackknifed. I'll see whether he can make up a set.

Originally Posted by becollier

...............

Looks like it's been jackknifed. ........

Seems like most of them had been to a major or minor degree.

(probably used for training ?? ).

This is where the equivalent Cooks branded trailer may be superior.

I needed to make some hood bows for the Inter. I wanted round. I ended up going to an engineering shop.

Whilst looking around, I inquired at a few horse float manufacturers. They could only bend square tube.

Someone will be able to make them. It is just a matter of asking around to find them.