carbys

well, it needed a little push from me:angel:

that and a bucket of carby cleaner:p

Quote:

---

Originally Posted by Pedro_The_Swift

well, it needed a little push from me:angel:

that and a bucket of carby cleaner:p

---

that'll do the trick. I was going to suggest one of the floats may have had a hole in it so it was no longer floating to the surface and shutting the fuel off when the bowl was full, but if its all good I wont :D

All fixed.
though how long my soldering job to the butt of a coil will last,,, ??

now if I could just get it to stop pumping coolant out--:angel:

Quote:

---

Originally Posted by Pedro_The_Swift

All fixed.
though how long my soldering job to the butt of a coil will last,,, ??

now if I could just get it to stop pumping coolant out--:angel:

---

LOL, where is the coolant escaping?

Out of the rad cap,,
these things (1988)were built before catch tanks,,,
yes its a new cap, took a bit of finding to get one that sealed properly.

Quote:

---

Originally Posted by Pedro_The_Swift

Out of the rad cap,,
these things (1988)were built before catch tanks,,,
yes its a new cap, took a bit of finding to get one that sealed properly.

---

Just as long as you know where it is.

You could make up a catch tank, milk bottle and duct tape should do the trick :D

Quote:

---

Originally Posted by Ace

Just as long as you know where it is.

You could make up a catch tank, milk bottle and duct tape should do the trick :D

---

with brumby's, all you need is a 2L milk bottle, IIRC fits just fine down beside the radiator on the passenger side..... lasts about 18 months