carbys

**Pedro_The_Swift** · 17th January 2011, 10:39 AM

well, it needed a little push from me

that and a bucket of carby cleaner

**Ace** · 17th January 2011, 11:37 AM

Originally Posted by Pedro_The_Swift

well, it needed a little push from me

that and a bucket of carby cleaner

that'll do the trick. I was going to suggest one of the floats may have had a hole in it so it was no longer floating to the surface and shutting the fuel off when the bowl was full, but if its all good I wont

**Pedro_The_Swift** · 18th January 2011, 09:50 AM

All fixed.
though how long my soldering job to the butt of a coil will last,,, ??

now if I could just get it to stop pumping coolant out--

**Ace** · 18th January 2011, 02:22 PM

Originally Posted by Pedro_The_Swift

All fixed.
though how long my soldering job to the butt of a coil will last,,, ??

now if I could just get it to stop pumping coolant out--

LOL, where is the coolant escaping?

**Pedro_The_Swift** · 18th January 2011, 04:30 PM

Out of the rad cap,,
these things (1988)were built before catch tanks,,,
yes its a new cap, took a bit of finding to get one that sealed properly.

**Ace** · 23rd January 2011, 05:19 PM

Originally Posted by Pedro_The_Swift

Out of the rad cap,,
these things (1988)were built before catch tanks,,,
yes its a new cap, took a bit of finding to get one that sealed properly.

Just as long as you know where it is.

You could make up a catch tank, milk bottle and duct tape should do the trick

**Sprint** · 2nd February 2011, 10:37 AM

Originally Posted by Ace

Just as long as you know where it is.

You could make up a catch tank, milk bottle and duct tape should do the trick

with brumby's, all you need is a 2L milk bottle, IIRC fits just fine down beside the radiator on the passenger side..... lasts about 18 months

Thread: carbys

Thread Tools

Bookmarks

Bookmarks

Posting Permissions