Results 1 to 5 of 5

Thread: 2005 Megane 16v 2.0 crank pulley replacement

  1. 22nd May 2015, 03:46 PM #1
    biggin
    biggin is offline Wizard Subscriber
    Join Date
    Feb 2009
    Location
    Newborough, VIC
    Posts
    1,541
    Total Downloaded
    67.72 MB

    Question 2005 Megane 16v 2.0 crank pulley replacement

    Hi all,
    I've had some good advice on this site in regards to my Renault, so I'll try my luck again.
    The crank pulley (harmonic balancer) is u/s and needs to be replaced, but I am not sure I can simply pull the old one off and bolt the new one on.
    Someone suggested to me that the timing can be thrown out by removing the pulley as there is no keyway.
    It is very hard to find reliable info on this, so any help would be greatly appreciated.
    Cheers,
    biggin
    2002 D2 4.6L V8 Auto SLS+2" ACE CDL Truetrac(F) Nanocom(V8 only)
    Reply With Quote Reply With Quote
  2. 29th May 2015, 03:36 PM #2
    biggin
    biggin is offline Wizard Subscriber
    Join Date
    Feb 2009
    Location
    Newborough, VIC
    Posts
    1,541
    Total Downloaded
    67.72 MB
    Yeh. I don't know either.
    2002 D2 4.6L V8 Auto SLS+2" ACE CDL Truetrac(F) Nanocom(V8 only)
    Reply With Quote Reply With Quote
  3. 30th May 2015, 03:12 PM #3
    Davehoos Guest
    I replaced an air conditoning compressor. The belt was wrapped in behind the crank pulley. bit of a no thinking about it job. I did a google and it came up with lots of different pictures of lots of versions.


    The pulley I replaced came from a wrecker and had Volvo on the tag and no timing marks.
    Reply With Quote Reply With Quote
  4. 1st June 2015, 08:47 PM #4
    biggin
    biggin is offline Wizard Subscriber
    Join Date
    Feb 2009
    Location
    Newborough, VIC
    Posts
    1,541
    Total Downloaded
    67.72 MB
    Yes there are lots of versions and that's what is worrying me.
    So you replace the crank pulley? Did you have to worry about timing, or did you simply unbolt the old and bolt on the new? Was it easy to get off?
    2002 D2 4.6L V8 Auto SLS+2" ACE CDL Truetrac(F) Nanocom(V8 only)
    Reply With Quote Reply With Quote
  5. 2nd July 2015, 04:05 PM #5
    DoubleChevron's Avatar
    DoubleChevron
    DoubleChevron is offline YarnMaster Supporter
    Join Date
    Feb 2013
    Location
    Ballarat,Vic,Aus
    Posts
    3,959
    Total Downloaded
    0
    try here .... aussiefrogs.com - French Car enthusiasts site for Australia Since 1999 - Citroen Peugeot Renault - aussiefrogs.com & Froggy Forum! .... in theory replacing a balancer shouldn't effect anything though.
    Proper cars--
    '92 Range Rover 3.8V8 ... 5spd manual
    '85 Series II CX2500 GTi Turbo I :burnrubber:
    '63 ID19 x 2 :wheelchair:
    '72 DS21 ie 5spd pallas
    Modern Junk:
    '07 Poogoe 407 HDi 6spd manual :zzz:
    '11 Poogoe RCZ HDI 6spd manual
    Reply With Quote Reply With Quote
« Clansman AFV Intercom harness, problem solving assistance needed. | Mixer taps »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!