Page 3 of 8 FirstFirst 12345 ... LastLast
Results 21 to 30 of 74

Thread: Out of Date Tyres

  1. #21
    Join Date
    Apr 2008
    Location
    Swansea, NSW
    Posts
    760
    Total Downloaded
    0
    I replaced all 5 tyres on my D2 at a Bob Jane store. The spare was still at about 90% so I took a spare rim from my old 4runner work pig to get the good tyre swapped over which they subsequently declined to do as the tyre was over 8 years old. Fair call I suppose given that everyone needs to cover their butt these days.

  2. #22
    350RRC's Avatar
    350RRC is offline ForumSage Silver Subscriber
    Join Date
    Mar 2008
    Location
    Bellarine Peninsula, Brackistan
    Posts
    5,502
    Total Downloaded
    0
    The tyres on my MF 165 were most likely made around 1967 (only has 1400hrs on it) and they're still pretty good.

    DL

  3. #23
    Join Date
    Jul 2006
    Location
    Brisbane, Inner East.
    Posts
    11,178
    Total Downloaded
    0
    Quote Originally Posted by Homestar View Post
    Some tyre centres try this on now if you take a tyre in for repair - happened to my neighbour when she did this. They said it was ‘out of date’ and she would need to replace all 4 tyres - she called me and I told her to hand the phone over to whoever was telling her this - I set him straight pretty quick and he said ‘It was a recommendation only’ but my neighbour said they didn’t want to give her car back until she agreed to buy a new set of tyres. Bloody thieves IMO.
    My local Bob Jane refused to repair a flat tyre as it was "unevenly worn" and "almost down to the wear buttons". It was not near the wear buttons. Now I don't pay for expensive high performance tyres to throw them away half worn. I had not repaired a tyre myself for probably thirty years. I went home and used my hydraulic press to break the bead, checked the inside and fitted a plug. Back on the rim and used a die grinder and a v-shaped small wheel to remove the wear buttons. Got another 12,000 k's out of it and the rest of the set. I sorted out the uneven wear by spinning the tyres left to right on the rim and wearing out the thicker side. I now wish I hadn't sold my regrooving iron.
    URSUSMAJOR

  4. #24
    Join Date
    Oct 2008
    Location
    Cloncurry NWQ
    Posts
    2,115
    Total Downloaded
    0
    I have just ordered new tyres for my box trailer.
    The tyres have plenty of tread & look fine but have been on the trailer for 10 years & were near new second hand when they went on.
    So, I just don't trust them any more & with tyres trust & confidence means more than saving a few bob.

    Jonesfam
    PS And changing tyres on a roadside is a pain.

  5. #25
    Join Date
    Jan 1970
    Location
    Brisbane, Queensland
    Posts
    5,778
    Total Downloaded
    0
    Quote Originally Posted by goingbush View Post
    Speaking of cheap Chinese tyres, I bought a set of 5 x Evergreen ES89 LT 215-85R16 from Tyroola @ $75 each , Whole set including delivery $445, ive only had them a few months & a few thousand km , but jeez I'm impressed , I can't fault them , Better in the slippery stuff than the luggy tyres I had on before too.

    Why risk driving on old tyres or retreads when these are so cheap.

    I had a similar experience with WinRun tyres.
    L322 tdv8 poverty pack - wow
    Perentie 110 wagon ARN 49-107 (probably selling) turbo, p/steer, RFSV front axle/trutrack, HF, gullwing windows, double jerrys etc.
    Perentie 110 wagon ARN 48-699 another project
    Track Trailer ARN 200-117
    REMLR # 137

  6. #26
    Join Date
    Oct 2008
    Location
    Cloncurry NWQ
    Posts
    2,115
    Total Downloaded
    0
    Can you still buy Re-treads?
    I thought that was a truck only thing these days.
    Jonesfam

  7. #27
    Join Date
    Jan 1970
    Location
    Brisbane, Queensland
    Posts
    5,778
    Total Downloaded
    0
    This thread is timely for me.

    Yesterday I got a flat on one of my 235/85/16s Dunlop Silent Armors. They are about 10 years old and have been good.

    I only got about 2 min down the road and heard/felt the flat tyre. Pulled over immediately. I was only going slow at the time, up hill approaching a roundabout.

    I was surprised to see the tyre wall was badly cracked all the way around and tread started separating.

    I suppose I put the condition down to age.
    L322 tdv8 poverty pack - wow
    Perentie 110 wagon ARN 49-107 (probably selling) turbo, p/steer, RFSV front axle/trutrack, HF, gullwing windows, double jerrys etc.
    Perentie 110 wagon ARN 48-699 another project
    Track Trailer ARN 200-117
    REMLR # 137

  8. #28
    Homestar's Avatar
    Homestar is offline Super Moderator & CA manager Subscriber
    Join Date
    Aug 2010
    Location
    Sunbury, VIC
    Posts
    20,105
    Total Downloaded
    0
    Quote Originally Posted by goingbush View Post
    Speaking of cheap Chinese tyres, I bought a set of 5 x Evergreen ES89 LT 215-85R16 from Tyroola @ $75 each , Whole set including delivery $445, ive only had them a few months & a few thousand km , but jeez I'm impressed , I can't fault them , Better in the slippery stuff than the luggy tyres I had on before too.

    Why risk driving on old tyres or retreads when these are so cheap.
    While I agree with most of what you’re saying, in some instances cheap and cheerful isn’t an option - like my 101. I’m not about to drop several thousand dollars every 5 years on that just to keep a tyre company happy and I haven’t found a set of cheap rubber that will fit the standard rims - there are some cheap options in 36 to 37” if you have the rim widened though but then steering becomes even harder and the turning circle is reduced. Also $400 can be quite a bit to some people so to those that struggle to keep a car on the road, they’ll want to wear a set out completely before buying another set at any price and not at a certain time interval. I do get your point though with so many option being available these days. 👍
    If you need to contact me please email homestarrunnerau@gmail.com - thanks - Gav.

  9. #29
    Join Date
    Mar 2012
    Location
    Armstrong Creek, Qld
    Posts
    8,757
    Total Downloaded
    0
    Last year I had a flat with an 8 year old tyre on the camper so I threw the spare on.
    The photo is the 8 year old, never been used, still had the blue stripe around it, always covered, spare tyre after about 15 klm. This was on the Pacific H'way, northbound near Tugun. There was nowhere to pull off so I had to drive for about 2 klms with it.

    When I checked the other camper tyre, there were stress marks on it as well. When it was removed from the wheel, on the inside of the sidewall were significant cracks, not visible externally. Admittedly we had travelled some pretty rocky and corrugated roads. (With lower tyre pressure)
    Ended up having to buy 3 new tyres.
    It wasn't as though the tyres had been sitting for any length of time as we use the camper regularly and have the stabilisers down when garaged.
    Going by my experience, I'm of the opinion that age does matter.
    Attached Images Attached Images

  10. #30
    Join Date
    Jan 1970
    Location
    Avoca Beach
    Posts
    14,152
    Total Downloaded
    0
    Goodrides are made by one of the top 10 tyre manufacturers in the World.
    After reading the reviews and doing some homework I intend to buy them next time.
    After all Michelin, Goodyear etc are now made in Thailand or China.
    if its good enough for Tvs STBs, phones, cameras, caravans , camper trailers ,washing machines, dishwashers ,etc it should be good enough for tyres.
    Regards Philip A

Page 3 of 8 FirstFirst 12345 ... LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!