Thread: 95 p38 vogue, dog chewed key

that sucks, how badly is it chewed? if the PCB is intact you "might" be able to get a cheapie remote off eBay or from a wreckers and replace the PCB.

Cheers, Paul.

Look here: http://www.aulro.com/afvb/p38a-range...-solution.html

did you only get one remote with the car? they should have two and a spare normal key. if you are in the Sydney area give me a call i may be able to repair your key or clear the BeCM and program another key.
you can get me on 0421 509 083
regards
Rupert Prior

Originally Posted by Rupert Prior

i may be able to repair your key or clear the BeCM and program another key.

I'd like to know how this is done as all information thus far indicates it is impossible to program another key to an exisiting BECM. (I need a second key, too.)

i repair auto electrics for a living and specialise in landrover but i can do most european marks. i can cleanout the becm and reprogram to a new fob code (i have to get bar codes translated to fob codes).

Rupert, you sound like a very useful bloke for us all to know

Can you do keyfob renews (resolder buttons, contact etc) like the link Ron posted above? and if so, what sort of price please? Bexley is a lot closer than the UK.

Cheers, Paul.

hi Paul
yes i can test units for correct frequency, range, refit buttons, battery connectors etc. cost to refit buttons with a new cover and clean up would be about $40-$50 plus postage. if it is not repairable i do not charge.
regards Rupert

Originally Posted by Rupert Prior

hi Paul
yes i can test units for correct frequency, range, refit buttons, battery connectors etc. cost to refit buttons with a new cover and clean up would be about $40-$50 plus postage. if it is not repairable i do not charge.
regards Rupert

Hi Rupert - sounds fair to me. Both of my keyfobs work, although sometimes a bit intermittently. I have replaced the batteries, battery cover, and button cover. Suspect they just need a bit of a refresh and checking connections to ensure reliable operation.

If you can PM me contact details I will send one of them to you for inspection/refresh.

Cheers, Paul.