Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 26

Thread: Spark plugs & oil

  1. #11
    Join Date
    Feb 2010
    Location
    Townsville, QLD
    Posts
    2,581
    Total Downloaded
    0
    MSD are also a good option too... They are the leads I run on my Chev!! You get to make them yourself too! Any length and size you like!

  2. #12
    Join Date
    Nov 2009
    Location
    Sydney
    Posts
    501
    Total Downloaded
    0
    Hi All,
    digging up an old thread I know, but rather than start a whole new one...

    Just wanted to say that I put some new plugs in my '00 Thor P38 on the weekend, maybe it's just me, but it already feels a lot smoother...

    Anyway, I used Bosch Platinum Plus FR7DPX. These were the same as the old ones anyway so I thought they will do the trick. They cost me $6.50 each from Repco (usually $8, also available from supercheap) Compared to about $25+ each for the champions, or $20 each for Denso, I figure this is a bargain! I asked the Repco bloke why they are so much cheaper, he reckons Bosch sell at least 10 times more plugs than the rest and can therefore be cheaper... Don't know about that...
    Anyway, I reckon I got a bargain, time will tell me if I did or not

  3. #13
    Join Date
    Feb 2010
    Location
    Townsville, QLD
    Posts
    2,581
    Total Downloaded
    0
    I recently replaced my plugs from ngk's to britpart jobbies that came in a service kit from the uk, my engine idled smooth beforehand (30,000kms on standard ngk plugs), now it misses every now and then on idle... Ngk have my vote!

  4. #14
    Join Date
    May 2008
    Location
    Canberra
    Posts
    1,834
    Total Downloaded
    0
    onya Keithy - makes me feel better about the NGK PFR5G-11 "Laser Platinum Premium" plugs that have been in my '99 Thor for almost 3 years and still don't miss a beat. At $26 each, they'd better be good
    My toys, projects and write-ups at PaulP38a.com

  5. #15
    Join Date
    Feb 2010
    Location
    Townsville, QLD
    Posts
    2,581
    Total Downloaded
    0
    I agree, ngk have always been in my engines, although I've just bought a D-max (settle down, its the mrs' new 4wd haha) so no sparkies in that! I should have left them in there, they were all still perfect... Shame I didn't keep any of them, if it ain't broke...

    Keithy

  6. #16
    Join Date
    Apr 2012
    Location
    Engadine NSW
    Posts
    204
    Total Downloaded
    0
    Ebay.uk absolute cheapest for iridium plugs about $90 delivered, got them in my '01 hse on gas.

    Rob

  7. #17
    Join Date
    Nov 2009
    Location
    Sydney
    Posts
    501
    Total Downloaded
    0
    I can't seem to find any evidence that iridium plugs are any better than platinum, except that they last longer with platinum lasting 60,000 MILES and iridium lasting 100,000MILES that's a huge difference... but so what? plugs are not that hard to change...

    So why would one pay $25 dollars a piece compared to $8?

    Have I made a "mistake" with the $6.50 Bosch platinums?

    Pete

  8. #18
    Join Date
    May 2008
    Location
    Canberra
    Posts
    1,834
    Total Downloaded
    0
    Quote Originally Posted by Marshall View Post
    So why would one pay $25 dollars a piece compared to $8?

    Have I made a "mistake" with the $6.50 Bosch platinums?
    'cos I like to test stuff out, and I'm a mug

    If the $6.50 Bosch plugs are rated for the P38 I am sure they will be fine. Let us know how they are doing after a couple of thousand Kms.

    Cheers, Paul.
    My toys, projects and write-ups at PaulP38a.com

  9. #19
    Join Date
    Aug 2010
    Location
    Pakenham
    Posts
    587
    Total Downloaded
    0
    Well BOSCH is one of the leading ignition manufactures out there, so not suprised to hear that they sell 10 more than the rest. However i have the standard NGK plugs which are now due for replacement, and might try the iridium ones.

  10. #20
    Join Date
    Jul 2010
    Location
    Sydney/Balmain
    Posts
    735
    Total Downloaded
    0
    Im not sure about leaving a plug in a cylinder head for 100,000km.
    For most people that would be 5+ years.
    Is there not more risk of getting a seized plug?
    I quiet like pulling my plugs every 2 years and having a look see at how things are going internally.
    A dab of Never seize might be wise with these long life plugs?

Page 2 of 3 FirstFirst 123 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!