Page 4 of 6 FirstFirst ... 23456 LastLast
Results 31 to 40 of 54

Thread: Newbie in the Land of Rovers

  1. #31
    Join Date
    Feb 2010
    Location
    Melbourne
    Posts
    337
    Total Downloaded
    0
    Also not sure about the concerns with LPG.
    I have a Sequential Injection (i.e: LPG Injected into the Cylinders like Petrol) Kit which has served me very, very well over the last 60,000km.

    It's really nice driving into the Petrol Station every 350km and only costing you around $34 to fill up.

  2. #32
    Join Date
    Nov 2011
    Location
    Geelong
    Posts
    47
    Total Downloaded
    0
    Thanks for your thoughts guys. I hope it is as simple as a lead. That would be unreal. I might pass that by my mate.
    Re: the LPG. That's great to know. If anyone else has testimonials that would also be great.
    Cheers
    (Out of pocket) Porchy

  3. #33
    Join Date
    Feb 2010
    Location
    Melbourne
    Posts
    337
    Total Downloaded
    0
    Good Luck Mate,
    I can understand peoples misgivings about using "Straight" LPG on these Engines as Valve Seat Wear etc can be an issue.

    However pretty much every Sequential System is Dual Fuel, mine starts and runs on Petrol for 3-4 minutes every morning whilst the car gets up to operating Temperature. I've also set mine to switch to Petrol when I'm above 4000RPM (Found it was easier in Calibration etc and better off road). As soon as it's back under 4000rpm it switches back to LPG.

  4. #34
    Join Date
    Nov 2011
    Location
    Geelong
    Posts
    47
    Total Downloaded
    0
    Well, to put it mildly, F*%$#@, Sh&*$%#, and bugger!

    Lead....no
    Rocker....no
    Spring....no

    My mate did the compression test today and whipped off the rocker cover.
    I am heading in tomorrow to pull off the head. Looks like I might have a valve issue. Losing compression on no.3 and pretty sure (also hoping) that it is in the top end.

    Porchy

  5. #35
    Join Date
    Nov 2011
    Location
    Geelong
    Posts
    47
    Total Downloaded
    0
    Head's off. It's the head gasket. Some dingbat when rebuilding the engine decided to put 2 19mm bolts in the middle of the head which has caused it to nicely blow out between them due to obviously not recalculating the tensions for the different bolts.

    So, 2 helicoils a new gasket and some more time and I'll have it done. Thank god it wasn't a valve, or worse, a ring.

    Porchy

  6. #36
    Join Date
    Feb 2010
    Location
    Melbourne
    Posts
    337
    Total Downloaded
    0
    Good Result in the end... considering the earlier forecasts...

  7. #37
    Join Date
    Nov 2011
    Location
    Geelong
    Posts
    47
    Total Downloaded
    0
    Hell yeah! I am a shocking pessimist when I have a problem with the car. I like to prepare for the worst so that I can have that great feeling of AHHHHHH when it turns out relatively ok.

    Porchy

  8. #38
    Join Date
    Dec 2009
    Location
    Tyrendarra Vic (South West Vic )
    Posts
    1,729
    Total Downloaded
    0
    Could have been the dreaded slipped liner. Much more pain. Not nice, but simple in comparison.

    Gary

  9. #39
    Join Date
    Nov 2011
    Location
    Geelong
    Posts
    47
    Total Downloaded
    0
    Blood oath Gaz. If it had been that I would have been tracking down the guy who rebuilt the engine and giving him a special Christmas visit.

    Porchy

  10. #40
    Join Date
    Dec 2009
    Location
    Tyrendarra Vic (South West Vic )
    Posts
    1,729
    Total Downloaded
    0
    Baseball bat or bunch of fives

Page 4 of 6 FirstFirst ... 23456 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!