Reckon you could use some kitchen extractor fan or clothing tumble drier ductwork or PVC guttering to fashion the round to recetangular to round section that would sit about the inner wheel arch liner.
Printable View
Reckon you could use some kitchen extractor fan or clothing tumble drier ductwork or PVC guttering to fashion the round to recetangular to round section that would sit about the inner wheel arch liner.
It does look really good!
Have you found the larger tires now scrub on the liner? Do you have bumpstop extensions at all?
Also the slightly larger air box doesn't seem to have the internal trumpet in the air box.
I really like the idea, and it looks to be a genuine snorkel, not an rai - but as Paul has said before, that depends wholly on the installation.
I'm a tad concerned about non laminar flow increasing intake restriction this increasing fuel use.
Sent from my GT-I9305T using AULRO mobile app
HI
This looks great well done!
I see the aulro engineering squad are all over it immediately :p
I too think we could use some smoother tubing "under the fender"
Any idea on costs ?
Steve
HiQuote:
Originally Posted by davidsonsm
Or fibreglass :angel:
Steve
Goodbye? :angel:Quote:
Originally Posted by FiveSPDDisco
Actually, you can't. I tried that years ago on my RRC snorkel and the ducting collapsed under acceleration. It will hold up with the airflow at idle but not when the engine is being called upon to deliver power. I had to go to a reinforced flexible duct, too. I ended up using 75mm Calor ducting from Pirtek.Quote:
Originally Posted by davidsonsm
Wasn't thinking the flexible stuff. Rather the rigid stuff.Quote:
Originally Posted by p38arover
Wasn't thinking the flexible stuff. Rather the rigid stuff.Quote:
Originally Posted by p38arover
Hi
Didn't someone mention PVC Downpipe? The rectangular section may work
Steve
Is definitely looking good, are they now available & final costing ??