ECU?
Wow - another EAS thread no less...
This one has got me stumped.
My EAS refuses to function but does not register a fault. I start the car and the suspension does nothing, the pump does not come on either. When I plug in Storey Wilson's EAS software there are no faults recorded, when I press the pump button, the pump starts. It seems to me that the EAS is not sending a message for the pump to run - does that sound right?
Anyone know where I should start with this? (apart from the coil conversion boys)
Jonathan
Last edited by poleonpom; 9th January 2013 at 08:52 PM. Reason: I can't spell
ECU?
check for, pump overheat (bridge the thinnest wire at the pump to ground and cycle the ignition plus wait a few minutes to reset system), pressure switch (testers normally read this the opposite way round to what it is) and of course the 10amp fuse in the eng bay fuse box.
also check contacts on the wiring connections. Try swapping the Delay Timer (under passenger seat) and/or the Driver Unit with a known good unit from another P38... lure another member over with promises of beer![]()
My toys, projects and write-ups at PaulP38a.com
Jonathon:
Give me a call/SMS.. I have a spare P38 in Werribee at the moment which we can have a fiddle with/swap parts as required....
Well, after fiddling around with it all yesterday the EAS decided to run perfectly with no issue - I am hoping that this doesn't signal a dreaded intermittent fault...
I have my annoying White overheating one... Plus the Hard Range Front Bar New one which still needs to get a Roadworthy and various mechanical things sorted before it becomes "My New offroad Baby"
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks