-
6th May 2013, 12:16 PM
#1
Dashboard connectors
I've bought a second height inhibit switch (not a momentary switch like the others yay) for the dash to wire an air locker solenoid up to, but curious if the plugs to fit in the back of the switch are easily available here is Oz? I'm guessing they won't be in Jaycar or any electronics store. If not I'll have to cut the plastic surrounds off and solder the wires straight on which is no biggy.
Thanks, Peter.
-
6th May 2013, 05:20 PM
#2
Hi pete,
Why don't you just go to a wrecker and see if they will allow you to cut one off an old loom?
Or I'm sure if you try "son of Bundalene " on this site he may be able to assist with one.
Other option is Matar Motors on Ebay! P38 wrecker. Derek. if you need his number PM me.
That way all you need to do is solder onto existing wires.
Good luck, Martin
-
6th May 2013, 08:12 PM
#3
I'll look into your other options so I don't have to drive 30 minutes to a Land Rover wrecker that I know will have one. Which I only just thought of after you mentioned to try a wrecker, derr why didn't I think of that before.
-
6th May 2013, 09:02 PM
#4
Is there a part number on the plugs at all?
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search AULRO.com ONLY!
|
Search All the Web!
|
Bookmarks