Thread: Engine Disabled. Press Remote

Originally Posted by Rupert Prior

yes, alarm and immobiliser are activated and deactivated with remote and or key in drivers door.

Rupert,
I'm presuming you need the BECM sent to you to do the reprogramming? How much $$$ to have the reprogramming done?

Gary

it should cost about $140+ postage. if possible please just send the bottom (logic) board from inside the becm.
regards Rupert

Yesterday, I had the Engine Disabled message come up again when the key fob did not unlock the door. Having the 2nd fob made no difference. It too did not work. Despite my owners manual having a sticker on it advising that the EKA code was not available on Australian models I thought I would give the local LR dealer a call to see if there was in fact an EKA available for the vehicle. A big thanks to Matt in Barbagllo spare parts who was able to give me the code after I provided the last six digits of the chassis number. Entered the code and I'm mobile again .

Gary

This thread prompted me to look at my owners manual and right there inside the cover is a "key code". But its only 3 digits. Aren't they supposed to be four?

Sean

Yep, mine has 4 numbers, and looking at the instructions it loks like 4 numbers are expected. A quick phone call to a LR dealer should be able to resolve it

Gary

Gary a lesson to all, get your EKA code and know how to use it.

Hi

This page has a lot on the subject and I have used the generic 1515 code successfully on my P38

Security and Alarm System Operation & Diagnosis on Range Rover 4.0/4.6/P38A

Steve