Results 1 to 4 of 4

Thread: Front axle seal leak

  1. 2nd January 2015, 10:21 AM #1
    Hammer H
    Hammer H is offline Master Supporter
    Join Date
    Sep 2012
    Location
    Perth Australia
    Posts
    323
    Total Downloaded
    0

    Front axle seal leak

    Hi All,

    Just noticed my rhs front axle seal has a leak, it's possible this has been slightly leaking for some time but I have only recently taken notice as I had two drops of oil on my tyre.

    Im thinking to check the diff oil level top up if required and continue on my 1500 km trip I have planned in two days and watch and the level during the trip.

    does this sound like good plan or should the seal be replaced ASAP?
    Reply With Quote Reply With Quote
  2. 2nd January 2015, 12:46 PM #2
    Hoges
    Hoges is offline YarnMaster Subscriber
    Join Date
    Aug 2007
    Location
    Brisbane
    Posts
    3,234
    Total Downloaded
    0
    It's about a steady hour's work to replace one seal. RAVE has a step by step description. You can remove the axle, CV joint and hub as a single unit. This saves time. see also http://www.aulro.com/afvb/discovery-...ml#post1835178 re. how to fit the seal... Shell "Retinax" is recommended... use it liberally. If you do it now you won't be worrying on the trip.
    MY99 RR P38 HSE 4.6 (Thor) gone (to Tasmania)
    2020 Subaru Impreza S ('SWMBO's Express' )
    2023 Ineos Grenadier Trialmaster (diesel)
    Reply With Quote Reply With Quote
  3. 6th January 2015, 12:25 PM #3
    glenhendry's Avatar
    glenhendry
    glenhendry is offline Master Supporter
    Join Date
    Oct 2010
    Location
    Carindale, Brisbane, Qld
    Posts
    652
    Total Downloaded
    0
    While I concur with Hoges's recommendation to fix, it may be useful information to know that my seal has been leaking (very slowly) on the right front for many months. Each time I replace the diff oil, it still appears full, or full enough. YMMV.

    Also, it is not good for us to drop oil onto the road, for those two-wheeler types, especially, so this is a good reminder for me to do mine.

    Let me know where you get your seal from
    Now: 2005 L322 Vogue 4.4 M62TU (Black)
    Before: 2000 P38A HSE 4.6 - stately capability | 2008 Kluger KX-S | 2004 Forester | 2000 Yamaha XJR1300 | 1993 VR Calais | 1974 HQ Statesman - 308 V8 | HT | HK
    Reply With Quote Reply With Quote
  4. 6th January 2015, 04:22 PM #4
    p38arover's Avatar
    p38arover
    p38arover is offline Major part of the heart and soul of AULRO.com
    Administrator
    I'm here to help you!     Gold Subscriber
    Join Date
    Jan 1970
    Location
    Western Sydney
    Posts
    30,708
    Total Downloaded
    1.63 MB
    There was a TSB about the seal. LR came out with a new seal which allows for some wobble of the half shaft. FTC 4822 replaces FTC 3452 driveshaft seal

    Mine has the later seals fitted.

    (I can't upload the TSB at the moment as Inc has the upload capability turned off temporarily. The TSB no. is 540396)
    Ron B.
    VK2OTC

    2003 L322 Range Rover Vogue 4.4 V8 Auto
    2007 Yamaha XJR1300
    Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA



    RIP Bucko - Riding on Forever
    Reply With Quote Reply With Quote
« Air filter for my steel trumpet air cleaner. | diagnostic scanner plug »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!