Page 5 of 5 FirstFirst ... 345
Results 41 to 44 of 44

Thread: Stuck in low range

  1. #41
    Join Date
    Jan 2011
    Location
    Burpengary, QLD
    Posts
    620
    Total Downloaded
    0

    Death wobble sorted, turns out that although the new panhard rod bushes were fine after they were fitted, a big morning off road must have given them a bit more space, the bolts are now "metal worker of 30 years with a 2 foot breaker bar" tight, and all is well.

    On the low range front it would appear that land Rover have stopped producing the speed sensors, so I'm trying to find someone who actually has one, at a decent price. All good fun!




    P38 Range Rover , the best car in the world, when it's working

  2. #42
    Join Date
    Jan 2011
    Location
    Burpengary, QLD
    Posts
    620
    Total Downloaded
    0

    Finally got the solution


    So I got a new speed sensor, and fitting it didn't change anything so I started looking for something, anything else.

    I tried another complete change of computer and transfer case motor, clutching at straws, did me no good.

    Today I decided to check the plug on the speed sensor, , it was fine, but I spotted a damaged wire, it looks like the plastic retaining clip came loose and let the wire from the speed sensor touch the handbrake drum,

    5 minutes with a soldering iron and low range in 3 beeps, reliable as clockwork, I am a very happy cha

    Now what do I do with 4 perfectly good transfer case computers?






    P38 Range Rover , the best car in the world, when it's working

  3. #43
    Join Date
    Feb 2010
    Location
    Townsville, QLD
    Posts
    2,581
    Total Downloaded
    0
    eBay!!!!

    Nice (and long overdue) find mate!

    Cheers
    Keithy

  4. #44
    Join Date
    May 2023
    Location
    Helsinki, Finland
    Posts
    1
    Total Downloaded
    0
    Quote Originally Posted by finallyrangie View Post

    If anyone ever needs to know, putting 12v straight across the motor positive battery terminal to the yellow wire on the plug winds it into high range.

    Now I just need to get rid of the select neutral message so I can hear my indicators again.





    Thank you for this information, I am making my own controller for range selection motor - have you got the pin arrangement what the other wires there are?

Page 5 of 5 FirstFirst ... 345

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!