Thread: Mirros turn down when reverse is selected

In the short term, turn the feature off.

A message will appear on the Message Centre saying Mirror Dip Off

To disable the dip function:
Turn the starter switch to position ’I’ or ’II’ (do
not start the engine) and select reverse gear.
Press and hold the seat MEMORY STORE
switch for 2 seconds and the message centre
displays ’MIRROR DIP OFF’ and a tone
sounds.

To restore the dip function:
Turn the starter switch to position ’I’ or ’II’ (do
not start the engine), and select reverse gear.
Press and hold the MEMORY STORE switch
for 2 seconds and the message centre briefly
displays the message ’MIRROR DIP ON’
(returning mirrors to, either the factory or
your own pre-set positions).

To oversome the initial problem, you might need to just go through the mirror dip setting again. I don't know.

I have to say that your roadworthy guy must be a hard marker.

Originally Posted by p38arover

In the short term, turn the feature off.

A message will appear on the Message Centre saying Mirror Dip Off



To oversome the initial problem, you might need to just go through the mirror dip setting again. I don't know.

Amazing thanks mate, now onto the ever so painful Air Suspension hack bypass job that's been done to it.

Do you have a copy of RAVE?