Thread: RR Sport wheels - Will they fit a P38?

I have the opportunity to buy a set of 18'' RR sport alloy wheels & tyres but I cant find out from anyone who actually knows ( as distinct from "thinking so" ) whether the RR sport wheel will fit onto a 2000 P38 hub?

Can anyone give a definitive answer?

Looks like I pressed Go twice! Must be my obsessive compulsive disorder taking control.....

The PCD is the same, but the wheel nuts are different and the centralising hub is also different.

To make them fit you will need to buy a centralising ring off ebay and use the wheel nuts that suit the RRS rims. The offset is also slightly different.

This fitment I believe also works for the current Rangie rims and the D3 rims if fitting to the Disco2 and P38 Rangie.

BTW, I have not done this. It is what I have turned up in my research.

Another option, BMW X3 or X5 wheels fit, but again they are a different offset and require BMW nuts.

I concur with Slunnie, but also have never done it.

Have seen 3 P38's in the w/shop running RRSport 19's(from a TDV8). Havent looked at what was fitted to make them fit if needed.
But you will have to buy 20 wheel nuts from a D3/Sport thats for sure.
Cheers

Thanks Everyone for really quick responses. Guess I will have to put some more thought into it.

Thanks again

Gandalph

Gandalph
I have done this.(18" RRS rims and Contis onto a P38a)
I sourced the wheel nuts and adaptor rings from a company in USA called Eurotech Wheels. My contact was Alex (email: PieCorpEmail@aol.com.)

The cost was $100-00 AUD for 20 Lugs (their term not mine ) (at that time the OE wheel nuts were nearly $30-00ea. )and 4 rings.
I also paid $75-00 for airfreight and had them in a few days. The Australian Dollar exchange rate was about 73c. ( a while ago )

They were very concerned that the RRS wheels were genuine and required part and serial numbers from the rims before shipping the goods.

Tips: Loctite the rings to the rims otherwise they weld to the hubs and the spare will not fit. You need to carry a spanner to suit the new nuts and also a set of 5 of the old nuts and the old spanner so that the spare can be fitted if needed.
Hope this helps.
I found their address:
EuroTech Wheels
6350 Nancy Ridge Road #104
San Diego CA 92121-3211
United States