What year model?
For pre-99 models, see my pics here:
radiolcd
I want to take the face plate of my radio head unit, there are two small narrow slots but I can't seem to feel any kind of lock/tab/release etc behind them, suggestions.
Cheers
Rushy
What year model?
For pre-99 models, see my pics here:
radiolcd
Ron B.
VK2OTC
2003 L322 Range Rover Vogue 4.4 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA
RIP Bucko - Riding on Forever
Thanks Ron but mines a 2001 and it is different but thank all the same.
Cheers
Rushy
Hi Scouse, it's HSE spec
Hi Rushy - if you can post a pic of the unit it will make it a lot easier for us to give useful suggestions.
Cheers, Paul.
My toys, projects and write-ups at PaulP38a.com
Most likely it's an Alpine. there are 2 keys required. They slot in each side of the radio chassis from the front.
Search RAVE "Special Service tools" section...page 133 of 140 using terms "radio removal" The Land Rover tool is LRT-86-006 there's a diagram and they're easy to make. I made mine from the black plastic base of a green Woolies grocery bag... LR proabably specify aerospace grade titanium...
You just need a couple of slivers a few mm wide and about 75mm long with a square section nibbled out a few from one end of each key. You slide the keys in horizontally at the top of the radio one each side... "nibbled" end first and facing "out" -the nibbled out section catches a tab : then just "pull" the keys out gently ...with the radio!
cheers
Thanks for the info gents,
Cheers
Rushy![]()
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks