Page 1 of 3 123 LastLast
Results 1 to 10 of 29

Thread: just got a MTB how to transport?

  1. #1
    Join Date
    Mar 2012
    Location
    Brisbne
    Posts
    631
    Total Downloaded
    0

    just got a MTB how to transport?

    I just got myself my first 'real' mountain bike, im used to bikes with motors but I need to get fit.
    This is it:


    wondering the best way to transport it with my Defender 90?

    Leroy

  2. #2
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    14,127
    Total Downloaded
    99.87 MB
    With an alloy frame it doesn't matter too much on how you transport it. They're robust enough. I wouldn't recommend on the roof however, I know of a lot of bikes that have been smashed off roofs. Personally, I always put bikes in the car, followed by a towbar bike mount for the MTB only and lastly the roof.

    For those with carbon frames, I wouldn't recommend mounting them by the top tube.
    Cheers
    Slunnie


    ~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~

  3. #3
    Join Date
    Apr 2009
    Location
    Crafers West South Australia
    Posts
    11,732
    Total Downloaded
    0
    Rip off the QR wheels and seat, chuck it all in the back.

  4. #4
    Join Date
    Aug 2008
    Location
    Canberra
    Posts
    509
    Total Downloaded
    0
    I read MTB & thought Motor Torpedo Boat. Disapointed now

  5. #5
    R Miller Guest
    I use a towbar mounted rack, ive got one solid one I made, to carry my bike and another 3 or 4 bike rack I bought to carry a few bikes,

    one thing to check out, your car insurance might only cover you up to $500 worth of bike. If you get hit from behind you could be out of pocket, I have had to insure my bikes through my house insurance so they are covered for everything, if there wrecked in transport, I smash it really hard, if its stolen, basically there covered as well as my car is

  6. #6
    Join Date
    Mar 2012
    Location
    Brisbne
    Posts
    631
    Total Downloaded
    0
    once I finish my draws and put the fridge back in the car there is no way it will fit in the car.
    i have an old towbar mount but then I wont be able to open the door till I take it off. . .

    i looked are spare tire mounts but with the defender i still think the door wont open with one of them :|

    I dont want to spend a fortune on a carrier. . . have friends with a swing away THULE one that I guess they can carry for me when i go with them. . .

    Leroy

  7. #7
    BigBlackDog Guest
    You could buy a 130!

    Just pull the front wheel off with the quick release, Only takes a few seconds. The seat shouldn't need to come off, length will be more limiting than height. Get an old doona or rug to protect the paint. If you get really pedantic make a mount for the forks to lock into and bolt that in the back. Don't stress about it, the bike shouldn't dent your car too much
    Last edited by BigBlackDog; 13th October 2013 at 05:03 PM. Reason: Can't type or spell

  8. #8
    Join Date
    Mar 2012
    Location
    Brisbne
    Posts
    631
    Total Downloaded
    0
    how bad is it for the bike if I lay it down on my roof cage?
    I cant fit it in the car with the fridge, and if i use my towbar mount my father used to use I wont be able to open the back door. . .
    any DIY spare wheel type carriers maybe?
    what about ratchet straps to the spare tire?

    Leroy

  9. #9
    Join Date
    Feb 2005
    Location
    Bracken Ridge - Brisbane - QLD
    Posts
    14,276
    Total Downloaded
    0
    Quote Originally Posted by Leroy_Riding View Post
    how bad is it for the bike if I lay it down on my roof cage?
    I cant fit it in the car with the fridge, and if i use my towbar mount my father used to use I wont be able to open the back door. . .
    any DIY spare wheel type carriers maybe?
    what about ratchet straps to the spare tire?

    Leroy
    If you're going to put it on the roof rack take the front wheel off and use a fork mounting bracket.....laying it down you have to content with the pedals, derailleur, marking your front shock, handle bars, brake levers etc etc....plus it looks better with the bike standing up on a defender, just watch for low flying branches

  10. #10
    R Miller Guest
    being a MTB im assuming hydraulic disc's so you will also need to make sure you have a wedge in your brake calliper or when you accidently hit the brake leaver your pads will come in and you wont get your wheel back in without a heap of stuffing around,

    I try to never remove my wheels unless I'm changing a tyre.

    also if you have Avid Juicy series brakes they don't like laying on there side or upside down for long periods, I have had 3 sets now and they have all played up when I use to store my bikes upside down

Page 1 of 3 123 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!