Reply With Quotesomething to hold your dune flag
YarnMaster
SupporterIts blowing 20 knots SE, so I spent some of this arvo tinkering up a part for an addition to the 'fender.
It is the first real project on the new engine lathe. Im pretty pleased with the out come. 6mm plate getting plasma cut on Tuesday to finish the job.
10 points to whoever calls what this is gonna be for. (hint: ID is 51.00mm)
Tube blank that it was turned from is on the left.
Ill keep updating the thread as the job progresses.
Steve
'95 130 dual cab fender (gone to a better universe)
'10 130 dual cab fender (getting to know it's neurons)
TopicToaster
something to hold your dune flag
YarnMaster
Supporter
Not too many dunes up this way... and I wouldnt go to that much trouble when duct tape works for flag holding ever so well!
S
'95 130 dual cab fender (gone to a better universe)
'10 130 dual cab fender (getting to know it's neurons)
ChatterBox
Adjustable cigar holder, for a Partagas D4 perhaps?
YarnMaster
Supporter2" thick cuban... Id be wanting some exe cognac to contemplate that.
The sleeve will be welded to a 6mm plate that is the base for the front shock towers (braced to steer box chassis holes). The sleeve wil sit 5mm in front of the spring bucket.
S
'95 130 dual cab fender (gone to a better universe)
'10 130 dual cab fender (getting to know it's neurons)
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks