Thread: Sunday arvo in the shed...

Its blowing 20 knots SE, so I spent some of this arvo tinkering up a part for an addition to the 'fender.

It is the first real project on the new engine lathe. Im pretty pleased with the out come. 6mm plate getting plasma cut on Tuesday to finish the job.

10 points to whoever calls what this is gonna be for. (hint: ID is 51.00mm)
Tube blank that it was turned from is on the left.
Ill keep updating the thread as the job progresses.

Steve

2" thick cuban... Id be wanting some exe cognac to contemplate that.

The sleeve will be welded to a 6mm plate that is the base for the front shock towers (braced to steer box chassis holes). The sleeve wil sit 5mm in front of the spring bucket.

S