Printable View
I know you don't like the LED version, but in case anyone is interested in local product, this is what I got for my AT temp and engine oil pressure - I also included the amp digital readout at the bottom to make a 3 way gauge. Does have alert levels for the pressure and temp. CheersQuote:
Originally Posted by FIXR7
https://autron.evolveshop.com.au/epa...52.27.030405.2
Ok did the notch on the weekend...
https://www.aulro.com/afvb/images/im...012/08/228.jpg
https://www.aulro.com/afvb/images/im...012/08/229.jpg
Dropped it off for Galvanising today.
Also made this stainless crossbar that picks up off the steering gaurd mounts for mounting the crossover tube...
https://www.aulro.com/afvb/images/im...012/08/216.jpg
Oh so close with an EL bottom hose! But I have to make an adapter tube with a barb for the header tank anyway so...
https://www.aulro.com/afvb/images/im...012/08/217.jpg
Mucked around with the gauge on the bench. works well.
https://www.aulro.com/afvb/images/im...012/08/218.jpg
Galvanizing done. They had a $150 minimum charge so I got the shock mounts done too. Drilled out the holes and bolted it up last night.
https://www.aulro.com/afvb/images/im...012/08/116.jpg
Did the fuel lines tonight. -6 fittings from Speedflow and teflon hose and the Fuel rail adapters are from Russell because Speedflow don't make em. Tried to get Aeroflow ones locally but of course they don't have em in stock and they cost more than double the Russell ones!?
https://www.aulro.com/afvb/images/im...012/08/104.jpg
The black pipes are heater pipes from a 5.0 Falcon and are pretty well perfect for a rangie. Just needed to put a slight dent in the pipe closest to the #1 injector for clearance otherwise it bolts on.
https://www.aulro.com/afvb/images/im...012/08/105.jpg
https://www.aulro.com/afvb/images/im...012/08/106.jpg
This is an E-series Falcon heater tap which I think I'll use because rather than just shut one pipe it diverts the coolant back to the pump.
https://www.aulro.com/afvb/images/im...012/08/107.jpg
Heres one of those rubber block trans line brackets I got off that LTD wreck.
https://www.aulro.com/afvb/images/im...12/09/1337.jpg
welded on brackets to take the trans cooler.
https://www.aulro.com/afvb/images/im...12/09/1338.jpg
This is really taking shape now Pete, looking good.
Cheers lads!
Hey do you guy's know if you can get engine enamel in the Land rover dark green like they have in the badges?
I no longer have the paperwork, but I think POR 15 had one very close to that colourQuote:
Originally Posted by FIXR7
Cheers Gavin, I'll check it out.