Results 1 to 5 of 5

Thread: Fuel access panel

  1. 4th February 2007, 08:16 PM #1
    easo's Avatar
    easo
    easo is offline YarnMaster
    Join Date
    Dec 2006
    Location
    Sunny Pucka
    Posts
    3,138
    Total Downloaded
    0

    Fuel access panel

    feul access.jpg Blknight.aus showed me how to do this. Just need to get the pic bigger. The measuerments are there but the pic is too small. The panel its self is 200mm X 200mm.
    Last edited by easo; 4th February 2007 at 08:19 PM.
    Reply With Quote Reply With Quote
  2. 28th February 2008, 11:19 PM #2
    Mulgo's Avatar
    Mulgo
    Mulgo is offline Master Subscriber
    Join Date
    Jan 1970
    Location
    Jannali - NSW
    Posts
    400
    Total Downloaded
    0
    Here are further details to do this access hole:

    Defender Td5 - Fuel Pump Access Hole

    Mulgo Pty Ltd
    Expedition vehicles & equipment
    69 Anderson Road, Mortdale NSW 2223
    p 0438 183 507 / www.mulgo.com.au

    Purchase your 4wd gear online:
    www.expeditioncentre.com.au

    follow us on facebook:
    facebook.com/expeditioncentre


    Reply With Quote Reply With Quote
  3. 29th February 2008, 03:36 PM #3
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,497
    Total Downloaded
    0
    how are those hinges and the stop plate flange rivets holding up?
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  4. 29th February 2008, 07:44 PM #4
    Mulgo's Avatar
    Mulgo
    Mulgo is offline Master Subscriber
    Join Date
    Jan 1970
    Location
    Jannali - NSW
    Posts
    400
    Total Downloaded
    0
    no issues - still going strong. just take the 2.5mm aluminium and stainless steel rivets.

    if you will be in Cooma you can check it out.

    cheers,
    daniel

    Mulgo Pty Ltd
    Expedition vehicles & equipment
    69 Anderson Road, Mortdale NSW 2223
    p 0438 183 507 / www.mulgo.com.au

    Purchase your 4wd gear online:
    www.expeditioncentre.com.au

    follow us on facebook:
    facebook.com/expeditioncentre


    Reply With Quote Reply With Quote
  5. 2nd March 2008, 06:50 AM #5
    easo's Avatar
    easo
    easo is offline YarnMaster
    Join Date
    Dec 2006
    Location
    Sunny Pucka
    Posts
    3,138
    Total Downloaded
    0
    Mines holding up well. Only had to replace the screw that holds the flap closed.

    Easo
    Reply With Quote Reply With Quote
« The Pheonix | 1980 V8 Rangie Build Up. »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!