How did the rangie do then?:p :p :p :pQuote:
Originally Posted by walker
Printable View
How did the rangie do then?:p :p :p :pQuote:
Originally Posted by walker
You big clown! :imwithstupid:
It needs some ROCK SLIDERS.......
I know of a set being used to breen Mussels down in the Bay......Quote:
Originally Posted by WOLLAPIT85
Wow, it's been weeks since I have had any time to work on the Hippo but I finally got in a couple of days.
Day 6 & 7
Pulled it all apart again after getting the pass from the engineer and put it all back using sikaflex, lots of rivets and same welding. I also shaped the fibreglass side panels (no pics yet) and temporarily mounted them in place so that I could mark out the cut for the back panel. Shaping and mounting the fibreglass panels took forever but at leat it's all done now.
https://www.aulro.com/afvb/images/im...007/05/159.jpg
Also added a bit more metal to the bottom of the back panel to finish it of a bit neater.
https://www.aulro.com/afvb/images/im...007/05/160.jpg
Day 8
Finished welding up the side panels and sealed it all with sticky flexible mastick stuff. I then gave it all coat of black rustkill. All this area will be hidden by the fibreglass panel.
https://www.aulro.com/afvb/images/im...007/05/161.jpg
Removed all the body mount bolts and the front bumper ready to do the body lift.
https://www.aulro.com/afvb/images/im...007/05/162.jpg
Looking nice Adam!! How much longer do you think it will take you?
Angus
About 12 months should do it.
:o
**** man you are building a car not a house!! I hope to be driving mine by the end of next month!Quote:
Originally Posted by walker
Yes. But you dont have to do:
Body lift
Spring lift
Engine changeover
LPG installation
Both axle swap
ect
ect:p
Plus, I work unlike you! ;)