G'day guys;

I have no idea what just happended to my earlier post in the "project and Tutorials Section" , it looks like as thou it got sucked into AULRO's black- hole


Anyhow in the back of Baz's post regarding the Headlight and Spotties wiring upgrade kit , I also ordered a Wiring upgrade Kit from Tim ( drivesafe ) last week & whilst I should have taken pics with the same Shutter speed and aparture settings on the digital set up on Tripod before the installation of the wiring upgrade kit , i just couldn't be bothered they look awesome , lot brighter on normal and highbeam than before.

GET a LOAD of THIS


Headlights on normal



Headlights on highBeam





High Beam & Spotties with faster Shutter speed increased so there isn't too much washout.





different shutter speed, redueced slightly , but I think you get the idea.






at the moment the spotties are wired up so that they can be switched ON/OFF
using the FOG light switch on the dash , this setup was wired up by previous owner and seems
to work a treat , so should I use the 2nd Relay and wire up the spotties using Traxide's
setup and wire up the spotties thru that way using the switch provided in the kit , or leave them where they are on the fog light cct ?