Printable View
Progress is slow, self inflicted illness:(
Holes in rear crossmember filled, no wonder they left the bracket bolted on...hid the damage:D
https://www.aulro.com/afvb/images/im...10/04/1607.jpg
Fuel tank mounts
https://www.aulro.com/afvb/images/im...10/04/1608.jpg
https://www.aulro.com/afvb/images/im...10/04/1609.jpg
Dummy fit cab to mounts second tank....still thinking...
https://www.aulro.com/afvb/images/im...10/04/1610.jpg
radiator mounts
https://www.aulro.com/afvb/images/im...10/04/1611.jpg
The chassis looks good:cool: Better than original in the mounts:p
My second tank is to high so cant use it all:(
Some things you my think about....... Brackets for the Aux battery,Air tank,compressor and under tray water tanks. May be a storage compartment.:)
How does your second tank being high, stop you from using it?Quote:
Originally Posted by Rangier Rover
I'm hoping to fit two N70 sized optima's under the seat still....
Just use a portable compressor, will make some brackets for 9kg LPG bottles on one side of the tray, also a storage draw, running from aux tank, through to and out the back, for tools, spares etc and the water tank is still under thought, will need to get one tiged up, not sure whether to go sill, or make a funny shape and surround the aux tank
Keep the thoughts coming though:)
Cut and shut rear mounty bits, are done
https://www.aulro.com/afvb/images/im...10/04/1599.jpg
Drivers door panel fit has turned a bit crap, will need to replace the top hinge and see if I can get it somewhere happy, if not lift the roof and move the pillar and repaint.....later:D
Fuel tank dummied with mounts
https://www.aulro.com/afvb/images/im...10/04/1573.jpg
and mounts
https://www.aulro.com/afvb/images/im...10/04/1574.jpg
Mig burn sucks:D
Mate of mine, made me a present:)
https://www.aulro.com/afvb/images/im...10/04/1506.jpg
You mean you got "mates" :eek:
when did that Happen ? Did I miss something?:p
:D:D
That piece of kit would be an adjustable Panhard Rod, can your mate another one for a Disco at a fee?
P.S BTW the project is coming along really well . KUTGW
Am I looking at an adjustable panhard rod?:cool:Quote:
Originally Posted by rovercare
If your lifting that thing or fitting pootrol shocks etc and need to raise/ angle the rear shock mounts may be a good time to stick new crush tubes in posi.:)
Nup, liability and all that:(Quote:
Originally Posted by Disco_owner
KUTGW?:confused:
Got lifted mounts already....actually, stole them off Vern:DQuote:
Originally Posted by Rangier Rover
I think next shocks will be pin to pin, if so I'll fab some mounts to suit