Printable View
Well after the past 45 mins being spent trying to find somewhere that stocks what I need; I gave up and went to Bunnings. They had 262 and 243. After reading the back I got the 243. It says the breaking torque is 20Nm, and Im only sposed to do them up to 11Nm so I thought that would do?
Well
Just got it finished and all put back together. Too be honest looking back, I dont think it really needed rebuilding :p Guess I now have spare parts
But I guess its an insurance policy, new Defender, (near) new compressor :D
The parts I got worked out about $70, the most expensive being the cylinder and piston.
https://www.aulro.com/afvb/images/im...008/12/308.jpg
https://www.aulro.com/afvb/images/im...008/12/309.jpg
Fitting back together
https://www.aulro.com/afvb/images/im...008/12/310.jpg
https://www.aulro.com/afvb/images/im...008/12/311.jpg
Exhaust Valve in
https://www.aulro.com/afvb/images/im...008/12/312.jpg
Inlet Valve in
https://www.aulro.com/afvb/images/im...008/12/313.jpg
Head bolts in
https://www.aulro.com/afvb/images/im...008/12/314.jpg
The three bolts I mentioned in the first thread
https://www.aulro.com/afvb/images/im...008/12/315.jpg
More precision than a hacksaw :twisted:
https://www.aulro.com/afvb/images/im...008/12/316.jpg
Cut and fitted (sorry forgot to take an after picture in the vice)
https://www.aulro.com/afvb/images/im...008/12/317.jpg
Filter on
https://www.aulro.com/afvb/images/im...008/12/318.jpg
All back together
https://www.aulro.com/afvb/images/im...008/12/319.jpg
https://www.aulro.com/afvb/images/im...008/12/320.jpg
And lastly next on the list :)
https://www.aulro.com/afvb/images/im...12/06/1088.jpg
Thanks to all those who helped
And I hope this helps someone
Sorry some of the photos are a bit blurry