OldBushie
I mean 5 degrees of rotationOriginally Posted by Waxenwane
You are kidding I hope or do you mean in total?
BTW Happy new year to all
Spec is +3 total
Wizard
That's pretty interesting. I hadn't really considered that you would get benefit from rotating only the castor angle and leaving diff pinion still pointing up after a lift.
I always thought you had to roll the whole axle casing assembly to get it to mirror original factory UJ angles. But it wouldn't unless you altered the wheel base! Too much zig zag!
Nice!
Master
That's better, I slotted mine 2.5 degrees and has made a noticeable difference.I mean 5 degrees of rotation
Spec is +3 total
i have a 3 inch lift on my disco 1 and all this talk about slotting swivels to correct caster has me very interested, my question is
how much of a slot/elongation of the hole do i need to move them 2.5 degrees or however far is needed, (i'll reread the thread to check the proper numbers)is there some way of using a tape measure or marking the swivel mount plate or something.
also there has been talk about propshaft, when u split them and rejoin them at the sliding joint/splined part they need to be put together correctly so the phase is right, how can i check mine to make sure there right as i have noticed vibration in the shafts
i do hope im not making a easily confusing subject worse
many thank marty
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Reply With Quote
Bookmarks