
Originally Posted by
John W
Interesting; has anyone had experience in fitting one into a D2 ARB steel winch bar? Is it an easy fit, just bolt in or do you need to do a little fabrication?
I've got one on my D2 with an ARB bar. It's not quite a bolt up fit.
I had to rotate the end housing so that the clutch lever was at the top and accessible but that can be done when re-greasing. I also found that the mounting bolts were not quite long enough. I think they were only about 10mm too short. Finally, I had to make a bracket to mount the relay/switch box.
Not a difficult fit but not just a bolt up job.
-- Paul --
| '99 Discovery Td5 5spd man with a td5inside remap | doesn't know what it is in for ...
| '94 Discovery Tdi 5spd man | going ... GONE
Bookmarks