yep...
or since you can custom make it to suit...
build a drop in cradle and add andersons to it so you can put it on either side.
All,
I'm collecting bits and pieces prior to commencing a Disco ute project. Intention is to have a road registered vehicle but one that is pretty much off road focussed - so 35' tyres, bob-tailed etc.
I've been thinking about installing the winch at the rear of the car. My experience with my current Disco with the winch on the bullbar is that winching it through whatever it is stuck in is generally harder than if I could winch out the way I drove in...
Any thoughts/experience/suggestions?
yep...
or since you can custom make it to suit...
build a drop in cradle and add andersons to it so you can put it on either side.
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
Ditto what Dave said.
My Aldi winch is sitting in a receiver hitch cradle awaiting a mobile vehicle to be fitted to (once I get the hitch added between the front rails) Anderson connectors front and back.
Winch is out to save weight day to day, in when I'm going bush. Just stored in the came of the vehicle to balance the loads.
Cheers, BDave.
Replace "You are...!", with "Are you...?"
Army Land Rover Buyers Guide.
buymilitaryvehicles.com
Reunited with RFSV 51 680, 'Sleazy'!!
'00 VeryDisco TD5 Auto,
Nanocom Evo for D2 TD5 and Puma
Gone:RFSV, 51-699, Carryall 48-358.
 Master
					
					
						Master
					
					
                                        
					
					
						front if you definitely need to get through what's in front of you and it's the only route.
But it can pull you deeper into the bad stuff
Rear if you are looking for recovery and have alternate routes, or don't need to go through the bad stuff. Good if you were just trying but got stuck. Usually a lot easier to pull yourself out the way you went in, instead of trying to get through.
Rear can usually be detachable and hooked onto the towbar in some way.
I use the latter detachable winch on my daily disco, but have a front and 2 smaller rears on my '81 patrol shorty
I agree that rear mounted makes a lot of sense however ................
With the specialist build as you suggest, have you thought about rear mounted with provision for appropriately positioned snatch block/cable guides to allow cable to be routed from the rear mounted winch and come out at the front?
Just a thought for the odd occasion when you need to PSA.
Roger
Thanks everyone. I've been thinking of a detachable cradle approach, but I'm generally pretty deep in the doo doo when I come to a stop. D2Lee's set up on his Patrol sounds ideal.
 Wizard
					
					
						Wizard
					
					
                                        
					
					
						I agree with extreme, that was my initial thoughts.
No matter what you do their will be pros and cons, you need to decide what compromises you are willing to live with.
Mobile cradles are good being able to move from front to back - but it is a hell of a lot easier to move with two of you - winches are not light. Usually when they are mounted to the front they stick a ways out in front.
Everybody seems to be on the mind set of getting stuck in mud - and yes going out backwards is usually the better option, but what about when you can not make it up a hill? Front mount would be handier.
 Wizard
					
					
						Wizard
					
					
                                        
					
					
						Mid mounted winch, round rollers at the back, then out the front. A lot of military vehicles do it this way.
Aaron
A number of years ago, I was in a party of off road vehicles driving through the bush. One fellow had a Suzuki ute with a winh at the front and a winch at the back.
With the Aldi winches being reasonably priced, why not put one each end?
Such as the 101.
And the Inter.
or...
make the cradle completely removable with a pair of torque reaction arms and chain hooks, a long pair of leads and then winch from any which way you feel like winching, make the arms the right shape and length and put a set of fairleads on them, hook them up on the winch line and they will also double to ensure the rope lays onto the drum evenly.
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
| Search AULRO.com ONLY! | Search All the Web! | 
|---|
|  |  | 
Bookmarks