Thread: BIG AL

1.6 flywheel with replaced ring gear
they machined the timing marks off for what reason i don't know

1.6 flywheel with later ring gear fitted

You can replace the early flywheel
with early starter

to late flywheel with late starter
You have to changs the flywheel housing
from 3 bolt to 2 bolt. common mod........

Have since cleaned it up with a grinder and asmall thin disc looks alot better will set it up minus g/box and run it thanks for your help big AL

Originally Posted by groucho

The 1.6 flywheel part No 212381. It also shows a seperate part No for a ring gear No 232404. 48 to 53 1954 and 55 to 58 al show different part No's
I have somewhere a write up on replacing the ring gear on the early flywheels. ie machining of the old one and shrinking on a replacement.
I will try to find it. The ring gear is soft as you can split them with a chisel
so building them up probably would work............