Results 1 to 7 of 7

Thread: Series 1 Horn Push

  1. 1st May 2010, 06:23 PM #1
    groucho's Avatar
    groucho
    groucho is offline Master Subscriber
    Join Date
    Nov 2006
    Location
    Wollongong NSW
    Posts
    622
    Total Downloaded
    0

    Series 1 Horn Push

    Having a horn centre that was broken i worked out that a series 2/3 horn button will fit. Now it is a little big, so you have to turn it down to fit. Not an easy job as it is just a disc with nothing to hold. After finding a way to hold it,
    reduced it in size and glued it to the spigot. I have a good spare horn push that you can hardly notice. Now you can say OH you can buy them here and there. But it cost me sweet bugger all to fix. The centre mark is the only tell tale mark you can see...........




    Reply With Quote Reply With Quote
  2. 1st May 2010, 06:25 PM #2
    groucho's Avatar
    groucho
    groucho is offline Master Subscriber
    Join Date
    Nov 2006
    Location
    Wollongong NSW
    Posts
    622
    Total Downloaded
    0
    The original one.





    Reply With Quote Reply With Quote
  3. 1st May 2010, 06:26 PM #3
    groucho's Avatar
    groucho
    groucho is offline Master Subscriber
    Join Date
    Nov 2006
    Location
    Wollongong NSW
    Posts
    622
    Total Downloaded
    0
    Not a good piccy but...............The two







    Reply With Quote Reply With Quote
  4. 1st May 2010, 07:48 PM #4
    JDNSW's Avatar
    JDNSW
    JDNSW is online now RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,510
    Total Downloaded
    0
    The secret to holding something like that to turn is to glue it to something you can chuck using a glue you can completely remove - that way you don't need the centre mark.

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol
    Reply With Quote Reply With Quote
  5. 1st May 2010, 07:55 PM #5
    groucho's Avatar
    groucho
    groucho is offline Master Subscriber
    Join Date
    Nov 2006
    Location
    Wollongong NSW
    Posts
    622
    Total Downloaded
    0
    Quote Originally Posted by JDNSW View Post
    The secret to holding something like that to turn is to glue it to something you can chuck using a glue you can completely remove - that way you don't need the centre mark.

    John
    That's all well and good if you can glue it in the certre to run true to start with. You havn't got mutch to work with.
    Reply With Quote Reply With Quote
  6. 1st May 2010, 08:22 PM #6
    JDNSW's Avatar
    JDNSW
    JDNSW is online now RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,510
    Total Downloaded
    0
    Quote Originally Posted by groucho View Post
    That's all well and good if you can glue it in the certre to run true to start with. You havn't got mutch to work with.
    True, but it can often be done - each case has to be considered on its merits.

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol
    Reply With Quote Reply With Quote
  7. 2nd May 2010, 11:40 AM #7
    Landy Smurf's Avatar
    Landy Smurf
    Landy Smurf is offline OldBushie
    Join Date
    Sep 2008
    Location
    smurf village
    Posts
    8,332
    Total Downloaded
    0
    good work groucho i doubt many people would know it is different if you didnt point it out to them.
    Reply With Quote Reply With Quote
« quick and urgent gearbox question | Look what followed me home, can I keep it...... »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!