Thread: Where to get a LRS1 (88", 1958) Wiring Loom (Melbourne)? Should I recondition transm?

You have the Series 1 Shop - in Victoria - they have your loom. I've bought various things from them and they are good.

http://www.seriesoneshop.com/content...s/d15.html#p59

Originally Posted by Hebe

........

Next I have my transmission out. It would be a good time to recondition it. However, who can do this in Melbourne at a reasonable price? It was previously working... just the regular old age looseness etc. Should I recondition, or just put it back in? If yes, where?

Thanks,

Kris

If you have it out, I would be inclined to at least check it over. It is likely that there is nothing much wrong with it, but quite possibly a few bearings and seals could do with replacing. If you were able to pull your Series 1 apart, and plan to reassemble it, and have a workshop manual and parts book, then there is no reason why you can't do this yourself - you would learn a lot, and save a lot of money.

John

I ordered one from Autosparks in the UK a few weeks ago. 204 Pounds delivered and it took about 3 weeks for a 107 with blinkers as well as the headlight loom. Very good service, you ask them for a quote via email and then once it's done they send you a link to the quote to order on line.
Ended up being $343.98 AUD

Regards,
Tote

Hi
get it from U.K.
quality product
far cheaper than getting it from Vinwire
who get their's from same place
cheers
Ian

Originally Posted by back_in

Hi
get it from U.K.
quality product
far cheaper than getting it from Vinwire
who get their's from same place
cheers
Ian

I thought the made their own
or are we being had ?

check out
' S.1. 1956 LWB '

MY THREAD, START AT POST #72.

"VINTAGECARPARTS" IS THE GO... $299 INCL POSTAGE!!

DIGGER

(See the attached file re looms etc and prices... uk vs aus now worse but still worth checking!= ask for a diagram with it! )

digger

Originally Posted by digger

check out
' S.1. 1956 LWB '

MY THREAD, START AT POST #72.

"VINTAGECARPARTS" IS THE GO... $299 INCL POSTAGE!!

DIGGER

(See the attached file re looms etc and prices... uk vs aus now worse but still worth checking!= ask for a diagram with it! )

digger

Link to Diggers post: http://www.aulro.com/afvb/1211546-post72.html

Hi, first let me ask all you guys... anyone out there in/around Melbourne who could have a look at my transmission?

Thanks,

Kris

Originally Posted by digger

check out
' S.1. 1956 LWB '

MY THREAD, START AT POST #72.

"VINTAGECARPARTS" IS THE GO... $299 INCL POSTAGE!!

DIGGER

(See the attached file re looms etc and prices... uk vs aus now worse but still worth checking!= ask for a diagram with it! )

digger

Hi Digger,

Thanks for that. I had a look at your post. I also requested a quote from them and got their Excel sheet. Since it lists extras, what did you end up ordering yourself?

Regards,

Kris