Quote Originally Posted by Freosmiths View Post
Hi Aaron - unfortunately not...holes the size of your thumb in the base...spoken to a fabricator but big $ as he wants to replace the base of tank and support mount as well....still considering options but thanks

Kevin
The damage that you are describing seems to be the same as that on my tank, and was quite easy to repair. Mine had holes to put your fist through, but the sides were good. The rust normally occurs between the bash plate come mounting platform, and the base of the tank. I removed the bash plate, put a veneer of steel on the base of the tank, and then re-attached the bash plate. Cost was a couple of sticks of solder, some sheet metal, and a few hours of my time.