Thread: Wiper motor repairer

Have managed to track down a couple of original type wiper motors for the 86. Have started to pull them apart to find more remnants of wasp nests than ideal and looking for advise on a good auto elec somewhere in Melbourne to rebuild at least one from the 2 to replace the aftermarket type I have put on to get me going.

Thanks in advance.

Dane

Dane



The early angle shaped motors ( if that's what you have ) are pretty much bullet proof . I usually pull them apart and clean up and they work OK. Sometimes the old grease inside goes hard , needs to be removed. Clean and check brushes and that's it.