Capstan Winch on an early 80?

And another....my computer skills need a polish up,i know...

https://www.aulro.com/afvb/images/im...013/03/570.jpg

Hi Paul,

The 64,000.00 dollar question is - is the perimeter of the casting curved in a continuous shape? or does it have parallel front and rear faces? If it is continuously curved and this is an intermediate (as AEH.P xx ) and a very early number at that too with only two drains like the AEH.V series.

I brought two of the AEH.V ones inside to compare with your photo but am not certain as the roller and grille are obscuring the winch body and I no longer have an AEH.D unit.

Bob

Quote:

---

Originally Posted by scarry

Does anyone know what year they started to come out with two drain holes?

---

hi 1958

Quote:

---

Originally Posted by bobslandies

Hi Paul,

The 64,000.00 dollar question is - is the perimeter of the casting curved in a continuous shape? or does it have parallel front and rear faces? If it is continuously curved and this is an intermediate (as AEH.P xx ) and a very early number at that too with only two drains like the AEH.V series.

I brought two of the AEH.V ones inside to compare with your photo but am not certain as the roller and grille are obscuring the winch body and I no longer have an AEH.D unit.

Bob

---

Parallel front and rear as there would be no room for full curves.

Quote:

---

Originally Posted by scarry

Parallel front and rear as there would be no room for full curves.

---

Oops, will you tell Max it doesn't fit or should I?

https://www.aulro.com/afvb/images/im...013/03/512.jpg

Better pic of winch,parallel front and rear,different to lotza's post.

https://www.aulro.com/afvb/images/im...013/03/439.jpg

Paul you'll have to learn your image codes!

I keep having to correct/delete them. :)

Diana