Reply With QuoteHi
always used copper
just remember to pull the head down again after 1000kms,and adjust the valves
cheers
Ian
SysAdmin (Owner)
about to get a vrs kit for my 55 2ltr engine
whats the best head gasket to get?
the cooper or the composite?
2007 Discovery 3 SE7 TDV6 2.7
2012 SZ Territory TX 2.7 TDCi
"Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
"If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
“What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
"We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
"The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius
Master
Hi
always used copper
just remember to pull the head down again after 1000kms,and adjust the valves
cheers
Ian
Master
If you use a copper gasket, buy a spray can of hylomar from a trade parts shop It's a pretty blue spray on sealer. It used to be made by Rollsroyce and I don't know of a solvent that removes it when dry.
Spray it on both sides, let it get sticky, do it three times and let it dry, then fit as normal.
No more leaky or blowen gaskets.
Cheers Steve
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks