Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Unknown landrover

  1. 8th March 2015, 08:41 PM #1
    milestone Guest

    Unknown landrover

    The vehicle 1950 80 inch serial No# R06114104 and came from a farm near Cudgewa Victoria Australia. It was bought for parts 35 years ago for my early Landrover. It has metal strips down the side of the bulkhead on both sides and metal angle braces at both corners at the bottom rear of the tub. There is an emblem painted on both doors that is faded but I have been told it is an early SMA. It also has holes drilled above in both rear wheel mudguards for something. It had a larger front bumper which originally been chromed with one side broken off. I used the brackets off it to mount a bull bar on another vehicle. but what is left is in the photo.
    Can anybody tell me if the metal strips and corner brackets were fitted to any Landrovers or have they been added by SMA or someone else.070.jpg

    069.jpg
    Reply With Quote Reply With Quote
  2. 8th March 2015, 11:31 PM #2
    Tomo
    Tomo is offline Master
    Join Date
    Apr 2007
    Location
    Jabiru, NT
    Posts
    274
    Total Downloaded
    0
    Sorry Mate,
    The pictures are too small.....
    Reply With Quote Reply With Quote
  3. 9th March 2015, 05:31 AM #3
    JDNSW's Avatar
    JDNSW
    JDNSW is online now RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,510
    Total Downloaded
    0
    Quote Originally Posted by Tomo View Post
    Sorry Mate,
    The pictures are too small.....
    If you click on them they enlarge.

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol
    Reply With Quote Reply With Quote
  4. 9th March 2015, 05:35 AM #4
    JDNSW's Avatar
    JDNSW
    JDNSW is online now RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,510
    Total Downloaded
    0
    Quote Originally Posted by milestone View Post
    ....
    Can anybody tell me if the metal strips and corner brackets were fitted to any Landrovers or have they been added by SMA or someone else.070.jpg

    069.jpg
    These strips and brackets were added after production. Similar modifications are not uncommon on early Landrovers as weaknesses in the original designs were uncovered by hard use.

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol
    Reply With Quote Reply With Quote
  5. 9th March 2015, 09:55 AM #5
    Tomo
    Tomo is offline Master
    Join Date
    Apr 2007
    Location
    Jabiru, NT
    Posts
    274
    Total Downloaded
    0
    Quote Originally Posted by JDNSW View Post
    If you click on them they enlarge.

    John
    Dam computer! Tried clicking on them and every right click option and still cant get the larger that a thumbnail........
    Reply With Quote Reply With Quote
  6. 9th March 2015, 10:07 AM #6
    digger's Avatar
    digger
    digger is offline ForumSage Subscriber
    Join Date
    Sep 2007
    Location
    RIVERLAND, SOUTH AUSTRALIA
    Posts
    6,740
    Total Downloaded
    0
    Quote Originally Posted by Tomo View Post
    Dam computer! Tried clicking on them and every right click option and still cant get the larger that a thumbnail........
    check out and see if your virus protection isnt preventing "popups" from appearing, if you get something across the base of screen asking then enable pop ups from aulro then it should show about 1/2 screen size

    This may not be the problem this time but is often the problem.
    (REMLR 235/MVCA 9) 80" -'49.(RUST), -'50 & '52. (53-parts) 88" -57 s1, -'63 -s2a -GS x 2-"Horrie"-112-769, "Vet"-112-429(-Vietnam-PRE 1ATF '65) ('66, s2a-as UN CIVPOL), Hans '73- s3 109" '56 s1 x2 77- s3 van (gone)& '12- 110
    Reply With Quote Reply With Quote
  7. 9th March 2015, 10:50 AM #7
    JDNSW's Avatar
    JDNSW
    JDNSW is online now RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,510
    Total Downloaded
    0
    Quote Originally Posted by Tomo View Post
    Dam computer! Tried clicking on them and every right click option and still cant get the larger that a thumbnail........
    Well, with my O/S (Linux Mint KDE) it is a left click, not a right click.....

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol
    Reply With Quote Reply With Quote
  8. 9th March 2015, 04:59 PM #8
    milestone Guest

    More Photographs

    I have attached more photographs (That is if they load up)
    Attached Images Attached Images
    Reply With Quote Reply With Quote
  9. 9th March 2015, 05:03 PM #9
    milestone Guest

    Another photograph

    Click on the link to enlarge photo.
    Attached Images Attached Images
    Reply With Quote Reply With Quote
  10. 10th March 2015, 09:47 AM #10
    Tomo
    Tomo is offline Master
    Join Date
    Apr 2007
    Location
    Jabiru, NT
    Posts
    274
    Total Downloaded
    0
    This time the photos worked perfectly!!!
    Excuse my ignorance, what is SMA?
    Those rear corner brackets are added, under hard use it was common to crack the corners of the tub. The LHS side of my 50 model tub is all cracked up as well......
    Cheers
    Reply With Quote Reply With Quote
Page 1 of 2 12 LastLast
« Swivels | 1957 88 Rear Brake Lines »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!