Thread: Front crank oil seal?

This may help , it tells you how to remove the timing cover. I think the seal goes in from the back ( can't remember been a long time) it is easer to get the seal out with the cover off. s1 work1.jpg s1 timing cover.jpg list 1.jpg Seal is item 3 . Check the seal surface on the harmonic balancer you may need to fit a speedy sleeve available from bearing company's . If you take the cover , harmonic balancer & old seal to them so they can measure they should be able to supply the seal as well. Sorry about the parts list being up side down , I inverted it but it turned again,
Hope this is of some help.

Thanks mate,

Thats perfect, cheers

Originally Posted by 1950landy

This may help , it tells you how to remove the timing cover. I think the seal goes in from the back ( can't remember been a long time) it is easer to get the seal out with the cover off. s1 work1.jpg s1 timing cover.jpg list 1.jpg Seal is item 3 . Check the seal surface on the harmonic balancer you may need to fit a speedy sleeve available from bearing company's . If you take the cover , harmonic balancer & old seal to them so they can measure they should be able to supply the seal as well. Sorry about the parts list being up side down , I inverted it but it turned again,
Hope this is of some help.

Hi Summiitt
Manuals here. Free downloads.
Land Rover Manuals
I printed out the 3, 80inch ones. Operators manual, workshop manual and parts manual, one wet, cold day.
1,000 odd pages.
Paper, ink, plastic sleeves, folders, came in around $50

whitehillbilly