Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Aero screens, Teak flooring and luxury bits that make your S1 special

  1. #1
    Join Date
    Jan 2017
    Location
    Perth
    Posts
    304
    Total Downloaded
    0

    Aero screens, Teak flooring and luxury bits that make your S1 special

    HI all,
    There are those in our community that staunchly believe that Series 1’s should utterly basic, uncompromisingly uncomfortable and anything even vaguely approaching luxury should be to put the torch.

    Well, I’d like to stamp a bit of my personality onto my 1953 S1 as part of its restoration , so have been keeping an eye out for things that might add to my use and enjoyment of my wonderful old Land Rover.

    Super keen to hear (and see) from anyone who has added or is considering adding something a bit special to their special vehicles.

    best wishes,
    Jeff
    Attached Images Attached Images

  2. #2
    JDNSW's Avatar
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,509
    Total Downloaded
    0
    Apart from the fact that all those pictures show Series 2/2a........

    The main concern is that Series 1 Landrovers are essentially collectible vehicles these days, with values a lot higher than they were a few years ago, and increasing quite rapidly. Provided they are substantially original! Most owners have no problems with this, as they are not using the vehicle as a daily driver.

    Having said that, there should be no issues with additions or modifications that do not permanently alter the vehicle. I think back to modifications I made to my Series 1 when it was my daily driver nearly sixty years ago. These included sun visors, seat belts, radio, door pockets, additional lights, sound deadening, that sort of thing.
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol

  3. #3
    Join Date
    Jan 1970
    Location
    Narre Warren South
    Posts
    6,792
    Total Downloaded
    0
    As mentioned by John, be aware that modifications may impact on the resale value in future years.

    Are you going to use this as a daily driver ?
    Why buy a Series I and then try to make it more 'comfortable' to drive, should you have purchased something else ?
    After a probably expensive restoration are you happy to compromise it's future resale value ?

    I've seen in the past where the engine is replaced, later full synchro gearbox fitted, brakes are upgraded, seats are replaced, suspension modified, power steering fitted, dozens of extra fuses fitted in the new wiring system etc. etc. then the owner says "it's great fun driving an old Series I"...........???

    Each to their own, it's your vehicle.

    Probably a different situation if the modifications were 'period' and the vehicle is left unrestored.
    1956 Series 1 with PTO welder (home made)


    Colin
    '56 Series 1 with homemade welder
    '65 Series IIa Dormobile
    '70 SIIa GS
    '76 SIII 88" (Isuzu C240)
    '81 SIII FFR
    '95 Defender Tanami
    Motorcycles :-
    Vincent Rapide, Panther M100, Norton BIG4, Electra & Navigator, Matchless G80C, Suzuki SV650

  4. #4
    Join Date
    Jul 2009
    Location
    S.E.Qld
    Posts
    1,401
    Total Downloaded
    0
    Quote Originally Posted by gromit View Post
    As mentioned by John, be aware that modifications may impact on the resale value in future years.

    Are you going to use this as a daily driver ?
    Why buy a Series I and then try to make it more 'comfortable' to drive, should you have purchased something else ?
    After a probably expensive restoration are you happy to compromise it's future resale value ?

    I've seen in the past where the engine is replaced, later full synchro gearbox fitted, brakes are upgraded, seats are replaced, suspension modified, power steering fitted, dozens of extra fuses fitted in the new wiring system etc. etc. then the owner says "it's great fun driving an old Series I"...........???

    Each to their own, it's your vehicle.

    Probably a different situation if the modifications were 'period' and the vehicle is left unrestored.
    1956 Series 1 with PTO welder (home made)


    Colin
    And plenty of chequer plate, don't forget chequer plate !!
    .W.

  5. #5
    Join Date
    Jan 2017
    Location
    Perth
    Posts
    304
    Total Downloaded
    0
    Sun Visors, terrific idea. I forget those. Thanks John,
    Naturally everything is reversible. This is about getting the most out of the Land Rover while you can.

    So if I can made her safer, more reliable and more usable, then I feel, that I should.

    They will all be unusable in a few years, when petrol is gone and polluting cars like ours are not permitted on the road, so your cars are effectively worthless now, so I suggest that originality in a 50 year old car is grossly overrates in the modern world. They are all going to China to be melted down for scrap in coming years, so think less about originality and more about putting 3 phase on your garage so you can recharge you flash new EV, which will cost you $2.00 a kilometre in road taxes.

    If I painted the tub floor in nice shiny Deep Bronze Green, then I would be reluctant to throw 20 or 30 bags of soil or manure into the back for the garden, but that's what I have her for.
    If I use EVA Foam as a decking material, it will reduce noise, never rot, never fade, and will protect the tub for years and is 100% reversible. Win, Win in my view.

    Sun visors, seat belts, new seating, fuses and interior lighting are all about safety and being able to share the car with family and friends. Without those, I can never allow my Grand-children to travel in her, that would be morally irresponsible.

    cheers
    Jeff

  6. #6
    Join Date
    Jan 1970
    Location
    Narre Warren South
    Posts
    6,792
    Total Downloaded
    0
    Quote Originally Posted by jedwards View Post
    Without those, I can never allow my Grand-children to travel in her, that would be morally irresponsible.
    So will you be adding fully engineered seatbelts and airbags ?

    I must be morally irresponsible because my Series I doesn't have seatbelts and my boys have been traveling with me in it since they were about 6 years old.


    Colin
    '56 Series 1 with homemade welder
    '65 Series IIa Dormobile
    '70 SIIa GS
    '76 SIII 88" (Isuzu C240)
    '81 SIII FFR
    '95 Defender Tanami
    Motorcycles :-
    Vincent Rapide, Panther M100, Norton BIG4, Electra & Navigator, Matchless G80C, Suzuki SV650

  7. #7
    JDNSW's Avatar
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,509
    Total Downloaded
    0
    Quote Originally Posted by jedwards View Post
    ...... They are all going to China to be melted down for scrap in coming years, .....
    cheers
    Jeff
    If you are talking about Series 1s, they are not going to China to be melted down - they are going mainly to the UK to be restored, being snatched up by canny dealers whose intervention has seen the price of them rise by a factor somewhere between two and ten in the last ten years. And as they become rarer, and as petrol and diesel cars become rarer, they are not going to become worthless - unless they have been modified in a way to make them expensive to restore.

    And no, most buyers are not buying them to drive regularly, but as display or collectible items, partly from nostalgia, even if they are occasionally driven, and if they are no longer allowed on the road, this will have little impact on their value.
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol

  8. #8
    Join Date
    Jul 2009
    Location
    S.E.Qld
    Posts
    1,401
    Total Downloaded
    0
    When Series Land Rovers left the factory they were very capable and reliable vehicles. Now 50 to 70 years later they are still very capable vehicles, how reliable they are is completely up to
    you and has got absolutely nothing to do with appearance. I've been traveling in an unrestored, but with a few additions, S1 Lwb for about 18 years. Flinders Ranges, Gulf country and in between etc. (I live near Brisbane) without any major breakdowns. And my work car since about 95
    .W.
    Attached Images Attached Images

  9. #9
    Join Date
    Jan 1970
    Location
    Narre Warren South
    Posts
    6,792
    Total Downloaded
    0
    Quote Originally Posted by B.S.F. View Post
    When Series Land Rovers left the factory they were very capable and reliable vehicles. Now 50 to 70 years later they are still very capable vehicles, how reliable they are is completely up to
    you and has got absolutely nothing to do with appearance. I've been traveling in an unrestored, but with a few additions, S1 Lwb for about 18 years. Flinders Ranges, Gulf country and in between etc. (I live near Brisbane) without any major breakdowns. And my work car since about 95
    .W.
    Love the pictures, love the Land Rovers.

    There is a temptation to over restore vehicles but I prefer the unrestored, original ones.

    I understand why some people want to have a Series I that looks better than new but there is then a temptation to not use it because the paint might get dirty.

    Driving my Series I to Cooma in 2008 with my late Father-in-law was an experience I'll never forget although I remember on the return trip asking if he wanted to go in 2018 and he said if he did, could we tow it there (he was late 60's at the time).
    In fact I ended up towing it there in 2018 because the FIL was sick and I went with my sons. Although one had his licence I didn't think he was up to a long trip driving the Series I.

    Each to their own but if investing a lot of money into a project you probably need to consider future value.


    Colin
    '56 Series 1 with homemade welder
    '65 Series IIa Dormobile
    '70 SIIa GS
    '76 SIII 88" (Isuzu C240)
    '81 SIII FFR
    '95 Defender Tanami
    Motorcycles :-
    Vincent Rapide, Panther M100, Norton BIG4, Electra & Navigator, Matchless G80C, Suzuki SV650

  10. #10
    Join Date
    Jul 2009
    Location
    S.E.Qld
    Posts
    1,401
    Total Downloaded
    0
    Colin
    I distinctly remember your SWB in Cooma and how much interest it created because it was a unique and unrestored vehicle. We drove to Cooma via Lake Mungo in the S1 109, which appeared in a couple of pictures in the Souvenir Booklet.
    .W.

Page 1 of 2 12 LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!