Results 1 to 6 of 6

Thread: Where might I find 3 Way brass brake pipe unions?

  1. 28th October 2021, 12:57 PM #1
    jedwards's Avatar
    jedwards
    jedwards is offline Master
    Join Date
    Jan 2017
    Location
    Perth
    Posts
    304
    Total Downloaded
    0

    Where might I find 3 Way brass brake pipe unions?

    Hi all
    I am rebuilding by brakes (along with everything else) and I have run into trouble trying to find the 3 Way Female brake-pipe unions (part 81 in the attached image) that our vehicles use.

    They are made from solid brass, so should survive in any old wreck. I believe they are common a ross all Series vehciles. These are used as splitters fro the brake fluid supply, so there is one for the front brakes and one for the rear. Parts manual refer to them as 219827 and 219828. Can anyone sell me a 2 of these as I am seeing No Longer Available at most of the UK supplier sites.

    Many thanks in advance.
    regards
    Jeff
    in Perth
    Attached Images Attached Images
    Reply With Quote Reply With Quote
  2. 28th October 2021, 04:05 PM #2
    B.S.F.'s Avatar
    B.S.F.
    B.S.F. is offline Wizard
    Join Date
    Jul 2009
    Location
    S.E.Qld
    Posts
    1,401
    Total Downloaded
    0
    These parts are unique to 80" Land Rovers with 1/4" brake pipes.
    .W.
    Attached Images Attached Images
    Reply With Quote Reply With Quote
  3. 28th October 2021, 04:20 PM #3
    jedwards's Avatar
    jedwards
    jedwards is offline Master
    Join Date
    Jan 2017
    Location
    Perth
    Posts
    304
    Total Downloaded
    0
    Many thanks BSF,
    Well, my truck is certainly an 80" with 1/4" brake pipes, so yes that is exactly what I am looking for.

    regards
    Jeff
    Reply With Quote Reply With Quote
  4. 28th October 2021, 05:33 PM #4
    Busted Syncro
    Busted Syncro is offline Master Supporter
    Join Date
    Nov 2014
    Location
    Sydney
    Posts
    210
    Total Downloaded
    0
    G'day,

    Dingocroft UK has a similar part advertised: Brass 'T' Piece for 1/4" Pipes
    Email them to see if the ports are inverted flare or SAE/DIN bubble flares.

    Have bought parts from them and usually good prices on genuine parts.

    Good luck.
    Chris
    Reply With Quote Reply With Quote
  5. 29th October 2021, 03:02 PM #5
    jedwards's Avatar
    jedwards
    jedwards is offline Master
    Join Date
    Jan 2017
    Location
    Perth
    Posts
    304
    Total Downloaded
    0
    Thanks Chris,
    Good suggestion. I've always had good success with DingoCroft. they seem on the ball and are always quick with shipment and answering any questions.

    regards
    Jeff
    Reply With Quote Reply With Quote
  6. 29th October 2021, 09:22 PM #6
    1950landy's Avatar
    1950landy
    1950landy is offline YarnMaster Supporter
    Join Date
    Sep 2012
    Location
    Westlake ,brisbane
    Posts
    3,922
    Total Downloaded
    0
    Quote Originally Posted by jedwards View Post
    Thanks Chris,
    Good suggestion. I've always had good success with DingoCroft. they seem on the ball and are always quick with shipment and answering any questions.

    regards
    Jeff
    You are lucky , I have never had a reply from them when I contact them over the years , so have never bought anything from them .
    Reply With Quote Reply With Quote
« Tiny bit excited | Degrees of rotation required to adjust valve clearances sequentially »

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!