Thread: Spare Wheel Retaining bolts for Series 1 80" Bonnet

I am pretty certain they are 9/16 inch BSF thread. But check the diameter, might be 1/2 inch. You will find them at your fastener shop alongside the hens' teeth.

Originally Posted by jedwards

Does anyone know the specification of the bolts used to retain the spare wheel on the bonnet of a Series 80"?
During replating the platers seem to have misplaced one. So I have one, but need help to locate another.

Any suggestions would be greatly appreciated.
regards
Jeff in Nedlands, Perth, WA

3/8 x 2" BSF. Head the same as wheel nuts. If they are any longer they will hit the bonnet if no spare fitted.
.W.

Most of the usual suppliers carry a modern reproduction (pn 345779)
Now zinc plated rather than the original hot dipped.

Clamp Bolt for Series Bonnet spare wheel carrier - Paddock Spares

Colin

80"and early 86" used 3/8" bolts.
.W.

[QUOTE=B.S.F.;3185579]80"and early 86" used 3/8" bolts.


Many thanks for everyones assistance . I feel quite embarrassed to say that I found the missing bolt, so have no need to purchase another.
As my good good wife would say, I should have had a big girls look!!!!
regards
jeff

Well done.
I usually find it a month after I'd bought a new one .....
Chris

At least we had a good discussion!