Reply With QuoteI thought that is as it is - just need the hold down brackets.
garry
Member
Hi, does anyone have pictures of the battery case and support brackets for a Series 1 86"?
Pic is of the current arrangement, and I will have to remove it to repair the relay housing, so thought I'd put it back the way it should be.
Cheers Adam
20240801_110355_resized.jpg
LordRover
SupporterI thought that is as it is - just need the hold down brackets.
garry
REMLR 243
2007 Range Rover Sport TDV6
1977 FC 101
1976 Jaguar XJ12C
1973 Haflinger AP700
1971 Jaguar V12 E-Type Series 3 Roadster
1957 Series 1 88"
1957 Series 1 88" Station Wagon
YarnMaster
SupporterOriginally Posted by 101RRS
And the aircleaner bracket that is usually attached.
Wizard
SupporterLAND ROVER SERIES BATTERY TRAY AIR FILTER MOUNT | eBay
LAND ROVER SERIES BATTERY TRAY AIR FILTER MOUNT
232550
Wizard
Drawing from the S1 54-58 parts catalogue.
.W.
Member
Thanks for this, now I need to find one in Aus!!
RoverLord
I think they remained the same for most Series vehicles, and there must be thousands in usable condition lying round sheds and scrap heaps round the country!
John
JDNSW
1986 110 County 3.9 diesel
1970 2a 109 2.25 petrol
Wizard
Don't be tempted to buy one for a S2 or 3, like the one on e-bay. They won't fit, you won't be able to close the bonnet. The 2/3 cleaners are taller.
You need one for a 54-58 model.
.W.
Wizard
SupporterWell, if you find a good one it would not be very difficult to modify the hold down straps. Much easier than starting from scratch without any dimensions.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks